User's Guide

33
Before Using the Handset
2
Insert the USB plug of the
microUSB cable horizontally into
the USB port of a PC.
･ When "PC Companion software"
screen appears on the terminal, tap
[Skip].
･ When a screen for new hardware
detection etc. appears on the PC,
select [Cancel].
3
When the charging is completed,
remove the microUSB plug of the
microUSB cable from the terminal.
4
Remove the USB plug of the
microUSB cable from the USB port
of the PC.
❖Note
･ If the microUSB cable is connected into the USB
connection jack for charging etc, the terminal is
automatically powered on although the operations
are not available. Be careful not to connect the
microUSB cable in a place where the use is
prohibited such as in airplane or hospital.
･ Check the connecting direction to connect
correctly. Wrong connection may cause damage.
ill