User's Guide

32
Before Using the Handset
1
Remove the back cover, put your
tip of thumb (nail) under the
battery pack from the groove of the
terminal, hold the battery pack up
in the direction of the arrow ( ) to
remove.
1
Insert the supplied microUSB
cable horizontally with the
microUSB plug engraved side
facing up into the connector for
USB cable of the terminal.
2
Insert the microUSB cable
horizontally with the USB plug
engraved side facing up into the
connector for USB of the AC
Adapter, and insert the AC Adapter
plug to the power outlet.
3
When the charging is completed,
remove the microUSB plug of the
microUSB cable from the terminal.
4
Remove the AC Adapter from the
power outlet.
❖Note
･ If the microUSB cable is connected into the
connector for external devices for charging etc,
the terminal is automatically powered on. Be
careful not to connect the microUSB cable in a
place where the use is prohibited such as in
airplane or hospital.
1
Insert the microUSB cable
horizontally with the microUSB
plug engraved side facing up
into the connector for USB cable of
the terminal.
Removing the battery pack
Charging with the AC Adapter
Charging with a PC
Continued on next page