User's Guide

189
International roaming
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO's network
automatically. If connection is failed, perform
the following operations.
･ Set "Preferred network mode" of "Network
Mode" to "GSM/WCDMA preferred". (P.190)
･ Set "Search mode" to "Select automatically"
in "Network operators" settings. (P.189)
When you start the international roaming or
move out of your operator's network, you
need to reconnect the terminal to another
available network.
❖Information
･ Some applications automatically perform packet
communications. To disconnect packet
communication manually, from the Home screen,
press t and tap [Settings] X [Wireless &
networks] X [Mobile networks] X [Data enabled]
to unmark.
Confirming and switching the
network search mode
By default, network search mode is set to
"Select automatically". When you connect
manually to an overseas network operator
conducted in flat-rate service, confirm the
search mode with the following operations
and switch to "Select manually".
1
From the Home screen, press t
and tap [Settings].
2
Tap [Call settings] X [Service
providers].
3
Tap [Search mode] X [Select
manually].
4
From "Available networks", tap to
unmark a network to use.
･ To display available networks, tap
[Search networks].
❖Information
･ If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
･ To return to "Select automatically", tap [Select
automatically] in Step 3.
Making a call to outside country
you stay (including Japan)