User's Guide

99
Settings
Viewing detailed information on a
connected Wi-Fi network
1
From the Settings screen (P.93),
tap [Wireless & networks] X [Wi-Fi
settings].
2
Tap the Wi-Fi network that you are
currently connected to.
･ The detailed network information is
displayed.
❖Information
･ To check MAC address and IP address, [Wireless
& networks] on the Settings menu screen (P.93) X
Tap [Wi-Fi settings], press t, and tap
[Advanced] .
By changing a Wi-Fi sleep policy, you can
choose to disable the Wi-Fi function in the
terminal when the screen backlight turns off.
You can also set the terminal to always turn
ON the Wi-Fi function or to turn it ON when
the terminal is charged.
❖Information
･ When a Wi-Fi network is disconnected, connection
is automatically switched to a 3G/GPRS network.
Adding a Wi-Fi sleep policy
1
From the Settings screen (P.93),
tap [Wireless & networks] X [Wi-Fi
settings].
2
Press t.
3
Tap [Advanced].
4
Tap [Wi-Fi sleep policy].
5
Tap any of [When screen turns off]/
[Never when plugged in]/[Never].
You can set up the terminal to connect to a
Wi-Fi network using a static IP address.
Setting up a static IP address
1
From the Settings screen (P.93),
tap [Wireless & networks] X [Wi-Fi
settings].
2
Press t.
3
Tap [Advanced].
4
Mark [Use static IP] checkbox.
･ Item of IP settings can be selected.
5
Tap an item to enter necessary
information.
･ Enter "IP address", "Gateway",
"Netmask", "DNS 1" to use a static IP
address.
6
Press t.
7
Tap [Save].
Wi-Fi sleep policy
Using a static IP address