SO-03D INSTRUCTION MANUAL ’11.
Introduction Thank you for your purchase of "SO-03D". For proper use of the SO-03D, read this manual carefully before and while you use the SO-03D. Before using the terminal ● The SO-03D supports W-CDMA, GSM/GPRS and Wireless LAN Systems. ● Because the terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or outside of the FOMA's service area.
Accessories ･ Battery Pack SO04 Supplied accessories ･ SO-03D (with warranty and Back Cover SO17) ･ AC Adapter Cable SO03 (with warranty) ･ Quick Start Guide (In Japanese only) ･ microSDHC card (16GB)* (Sample) (with instruction manual) クイック スタート ガイド * Inserted in the terminal when purchased.
About manuals of SO-03D In addition to this manual, the operations of SO-03D are described in "Quick Start Guide" (in Japanese only) and "Instruction Manual" application of the terminal. "Quick Start Guide" (Supplied accessories) The initial operations and settings after purchasing the terminal, screen view contents and operations of main function are explained.
Operation descriptions ･ Please note that "SO-03D" is called the "the terminal" in this manual. In this manual, each key operations are described with p, x, y, t, s, m. And selection operations of the icons or function items on the touch panel are described as follows. Description Operation From the Home screen, press t and tap [Settings]. From the Home screen, press t (Menu) key and tap "Settings" on the screen. Tap [Settings] X [Date & time] X [Set date].
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About manuals of SO-03D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings → P.93 Mail/Internet → P.122 File management → P.138 Games ･ Viewing the setting menu .......................................................93 ･ Wireless & networks ...............................................................93 ･ Call settings..........................................................................102 ･ Sound ...................................................................................103 ･ Display ......................................................................
Applications → P.150 International roaming → P.186 Appendix/Index → P.193 ･ Using the camera.................................................................150 ･ Shooting screenshot ............................................................158 ･ Playing multimedia content ..................................................158 ･ Viewing photos/videos with Gallery .....................................160 ･ Playing video with YouTube..................................................163 ･ Music player.....
Notes on usage ･ The terminal does not support i-mode sites (programs) or i-D ppli. ･ The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching movie, a packet communication charge becomes high. Subscription of packet flatrate service is highly recommended. ･ Public mode (Driving mode) is not supported.
･ If your terminal is lost, change your each account password to invalidate authentication using a PC to prevent other persons from using Google services such as Google Talk, Gmail, Android Market, etc., Facebook, Twitter and mixi. ･ The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ Packet communication charge when using tethering varies depending on the charging plan you use.
Safety Precautions (Always follow these directions) ■ For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. Keep the Manual in a safe place for future reference. ■ ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.
1. Handling the terminal, Battery Pack, AC Adapter cable, and UIM (general) DANGER Don’t Don’t Do not use, store, or leave the terminal, battery pack, AC adapter cable, or UIM in a place subject to high temperature such as close to fire, under direct sunlight, or in a car on an extremely hot day. Doing so may cause fire, burns or injury. Do not place the terminal, battery pack, AC adapter cable, or UIM inside cooking appliance such as a microwave oven or highpressure containers.
CAUTION Don’t Don’t Do Do Do 2. Handling the terminal WARNING Do not place on an unstable or inclined platform. Doing so may cause the device to fall and cause injury. Do not keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause fire, burns or electric shock. If children use the terminal, parents or guardians should give them the proper instructions for use. Make sure that they use the terminal as instructed. Failure to do so may cause injury.
WARNING Do Do Power off the terminal in a place where the use is prohibited such as in airplane or hospital. Failure to do so may affect electronic equipment and electronic medical equipment. If you set the automatic poweron function, cancel it before powering off the terminal. Follow the instructions of each medical facility for the use of mobile phones on their premises. Prohibited acts such as mobile phone usage on board an airplane may be punished by law.
CAUTION Don’t Do not swing the terminal around by holding the strap, etc. The terminal may hit you or others and cause accident such as injury. Don’t Do not use damaged terminal. Doing so may cause fire, burns, injury or electric shock. Don’t Do Do If the display is mistakenly damaged and when the liquid crystal runs out, do not get it on your skin such as face, hands, etc. Doing so may cause blindness or injury on your skin.
DANGER Don’t Do not stick a nail into the battery pack, hit it with a hammer, or step on it. Doing so may cause battery pack to ignite, explode, overheat or leak. Do If the battery fluid gets into your eyes, do not rub, rinse with clean running water, and get medical treatment immediately. Failure to do so may cause blindness. CAUTION Don’t WARNING Don’t Do Do If the battery pack seems to have abnormalities such as deformation or scratches due to falling, never use it.
WARNING Don’t Don’t Don’t Don’t Don’t WARNING Do not use the AC adapter cable in a very humid or steamy place such as bathroom. Doing so may cause fire, burns or electric shock. Do not touch the AC adapter cable if you hear thunder. Doing so may cause electric shock. Do not short-circuit the microUSB plug while it is connected to the power outlet. Do not touch the microUSB plug with your hands, fingers, or any part of your body. Doing so may cause fire, burns or electric shock.
WARNING WARNING Before cleaning, remove the power plug from the power outlet. Failure to do so may cause fire, burns or Unplug electric shock. 5. Handling the UIM CAUTION Do Do Please be careful not to touch a cut surface when you remove the UIM. Failure to do so may cause injury. 6.
WARNING Do If you need to use electronic medical equipment other than implantable cardiac pacemaker or implantable cardioverter defibrillator outside medical facilities such as treating at home, check with the relevant medical electronic equipment manufacturer whether the operation may be affected by radio waves. The radio waves from the terminal may affect the performance of electronic medical equipment. 7.
Part Exterior case (Lateral side of body) Material PC resin (with glass) Surface treatment Non-conductive vacuum metallization (tin)+ UV coating Hardware key (L button, R button) PC resin (with glass) Non-conductive vacuum metallization (tin)+ UV coating Hardware key (Volume key, Power key) PC resin UV coating Back Cover PC resin (with glass) UV coating Handling precautions ■ Common precautions ･ Do not expose to water. The terminal, battery pack, AC Adapter cable, and UIM are not waterproof.
･ Clean the terminals occasionally with a dry cotton swab. If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. ･ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction.
･ The terminal could become warm while in use and charging. This condition is not abnormal. You can continue charging the battery. ･ Do not leave the camera under direct sunlight. If you do so, some of the elements may melt or become faded. ･ Do not use the terminal without the back cover. Doing so may cause the battery pack fall, malfunction, and damage. ･ Do not put extreme thick stickers etc. on the keypad side. Doing so may cause malfunction, damage or erroneous operation.
･ Do not store the battery pack in the following cases: - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the phone cannot power on) The performance and life of the battery pack may deteriorate. It is recommended that you store the battery pack with the remaining battery level of about 40 percent as a guide. ■ AC adapter cable precautions ･ Charge the battery pack in an environment with the proper ambient temperature (5°C to 35°C).
･ Do not insert the UIM on which any label or seal is stuck into the terminal. Doing so may cause malfunction. ■ Bluetooth function precautions ･ To secure the Bluetooth communication security, the terminal supports the security function compliant with Bluetooth standards, but the security may not be sufficient depending on the setting. Concern about the communication using the Bluetooth function.
■ Wireless LAN (WLAN) precautions ･ Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio wave reaches On the other side, if you communicate without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to make necessary security settings on your responsibility and expense.
■ Cautions ･ Do not use an altered terminal. Using an altered device is a violation of the Radio Law. A "Technical Conformity Mark " affixed on the manufacturer's specification sticker certifies that the terminal meets technical regulations for specified radio equipment that are based on the Radio Law. If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid.
Before Using the Handset Part names and functions defg hi op q a b c r s t x y z A j u B v w k a b c d e f g h C lm n microUSB connecting terminal Headset connector HDMI connector (type D) Notification LED Notifies charging condition, missed call or unread mail. Proximity sensor Turns on or off the touch screen to prevent erroneous operation during a call. Light sensor Adjusts screen brightness. Do not cover it with your fingers etc. Ear speaker Allows you to hear the other party's voice etc.
s p Power key/Screen lock key Turns on/off power. Also, turns off the backlight and sets key lock. t Whip antenna Extend it when watching TV (1Seg). It has no influence on calls or data communication if you extend the whip antenna when calling or using browser. u m Volume key/Zoom key v k Camera key Hold it down for at least one second to activate Camera. Use it as a shutter to take photos or movies.
UIM The UIM is an IC card recorded user information such as your phone number etc. When the UIM is not inserted to the terminal, you cannot use some functions (phone function, etc.) of the terminal. ･ In this terminal, the UIM (blue) is not available. If you have the UIM (blue), bring it to the nearest docomo Shop to replace. ･ When inserting/removing the UIM, make sure to power off the terminal and remove the back cover. Do not connect the AC Adapter cable.
Removing UIM 1 Remove the back cover, press the UIM with your fingertip and remove it sliding outside. ❖ Information ･ Make sure to attach the back cover before using. The microSD card cannot be recognized if the back cover is not attached. ･ Do not touch the back cover detect switch. It may cause malfunction or damage. Inserting microSD card 1 2 ❖ Information ･ Please be careful not to touch or scratch a metal part (IC) when you handle the UIM. Doing so may cause malfunction or damage.
Removing microSD card 1 Remove the back cover (P.27). ･ If the back cover is removed, " SD card safe to remove" appears on the status bar. Make sure that the microSD card is unmounted then remove the microSD card. 2 Insert the microSD card straight into the slot all the way until it clicks. 3 Pull out microSD card slowly. ･ The icon in the status bar changes to to notify that microSD card is removed. Charging The battery pack is not full charged when you purchased the terminal.
Battery pack life ･ The battery pack is a consumable accessory. The usage duration of the battery per one charge decreases gradually each time the battery is recharged. ･ When the usage duration per one charge becomes about half of a new battery pack, the life if the battery pack is assumed to be almost over. It is recommended that you replace the battery pack ahead of time. Depending on the usage condition, the battery pack may be inflated as it comes to be end of its life. This is not a malfunction.
Attaching the battery pack ･ When attaching/removing the battery pack, make sure to power off the terminal. 1 2 Remove the back cover (P.27). Check the orientation of charging jack of the battery pack, insert it in the direction of the arrow ( ) aligning the notches of the terminal and battery pack. 3 Check the direction of the back cover, and attach to the terminal body ( ), press each part marked as shown and make sure that there are not any spaces between the body and cover ( ).
Removing the battery pack 1 Remove the back cover, put your tip of thumb (nail) under the battery pack from the groove of the terminal, hold the battery pack up in the direction of the arrow ( ) to remove. 2 Insert the microUSB cable horizontally with the USB plug engraved side facing up into the connector for USB of the AC Adapter, and insert the AC Adapter plug to the power outlet. 3 When the charging is completed, remove the microUSB plug of the microUSB cable from the terminal.
2 Insert the USB plug of the microUSB cable horizontally into the USB port of a PC. ill ･ When "PC Companion software" screen appears on the terminal, tap [Skip]. ･ When a screen for new hardware detection etc. appears on the PC, select [Cancel]. 3 When the charging is completed, remove the microUSB plug of the microUSB cable from the terminal. 4 Remove the USB plug of the microUSB cable from the USB port of the PC.
Turning power on and off Turning power on 1 Press p for over a second. ･ The key unlock screen appears. Turning power off 1 2 3 Press p for over a second. ･ Phone options menu appears. Tap [Power off]. Tap [OK]. Setting Key lock When the key lock is set, the screen light turns off. You can avoid the touch screen or button from false operations. ･ The terminal keys are locked with turning the screen light off after the specified time duration. 2 Deactivate the key lock.
1 Unlocking the keys A key unlocking screen appears when turning the power on or the backlight on by pressing p/y. 1 Touch and drag it laps over. to 2 Initial settings (Setup guide) When you turn on the terminal for the first time, Setup guide appears to set up the display language, wireless network, online services, etc. and to import contacts. ❖ Information ･ You can set or change the items later as required.
7 8 Tap . ･ The import contacts screen appears. If you have contacts saved in the UIM, from the Home screen, tap X Tap [Contacts] then [Import] in "Import contacts" on the contacts import screen X Tap [SIM card]/[Memory card] to select "account" X Select "contacts to be imported". Tap X [Finish]. ･ The Home screen appears. ❖ Information ･ Make sure to check if the data connection is available (3G/GPRS) before setup online services. For checking the data connection status, see "Status icons" (P.36).
Connecting to Wi-Fi using AutoIP function The battery is charging. The Bluetooth function is ON. UIM is locked or not inserted. microSD card unmounted (disabled reading and writing), ready to remove Media server activated in Connected devices microSD card removed Media server connection request notification in Connected devices Bluetooth connection request notification Red: Error messages Yellow: Warning messages Installation is completed (when installing applications from Android Market, etc).
Notification panel Notification icons are displayed in the Notification panel. You can open notifications, such as messages, remainders, or event notifications directly from the Notification panel. Opening/Closing the Notification panel ❖ Information ･ Some notifications cannot be cleared. Notification LED Notification LED provides information on the terminal status, incoming/receiving, etc. LED status Status Red The battery is charging when the remaining battery level is less than 10 %.
Basic operations Basic hardware key operation s Google ･ Display entry screen for the Search search box to search information in the terminal or on the Internet. (P.47) * In this manual, each key operation is described with x, y, t, s. Using the touch screen Precautions on using touch screen x Back ･ Go back to the previous screen. Or close a dialog box, options menu, or the Notifications panel. ･ Close the software keyboard. y Home ･ Go to the Home screen.
Operations on the touch screen ■ Tap Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice quickly. ■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinch-out to zoom in and pinch-in to zoom out. ■ Touch Touch and hold an icon or menu item long. ■ Flick Stroke the screen with your finger lightly and flick up/down/left/right.
Selecting items quickly from a list Some lists have Japanese syllabary and alphabetic index on the right side of the screen. ･ Drag your finger along the index to scroll through the list. Marking or unmarking options You can switch ON/OFF of the option settings by marking or unmarking the checkboxes or radio buttons. ･ To switch ON/OFF of the option setting, tap the checkbox or radio button. ■ Checkboxes Marked Unmarked ■ Radio buttons Marked Unmarked ･ Tap the index character to move on the list.
Home screen The Home screen consists of 5 screens: the center screen and 2 auxiliary screens on right and left. The center screen is the starting point of the terminal operation. You can personalize the Home screen by adding or moving, for example, application shortcuts and widgets, or changing the wallpaper.
Switching the Home screen 1 Flick the Home screen to left or right. ･ The Home screen switches. ❖ Information ･ You can check the current position of the Home screen with at the top of the screen. Changing the Home screen 1 From the Home screen, press t. 2 Tap [Add]. ･ "Add to home screen" menu appears to change the Home screen. ■ Add to home screen Adding a shortcut on the Home screen 1 In "Add to home screen" menu, tap [Shortcuts]. 2 Select a shortcut you want to add.
Friends' music & videos Display lists of videos or music tracks shared on Facebook. FUN& downloads mini/normal Display a list of games you can play with XperiaTM PLAY. (Get games) Google Search Display the Quick search box. Home screen tips Display tips of the Home screen operation. Latitude View locations of members.
Weather widget View weather in the specified area. World clock YouTube 2 Select time zones to display date and time of up to 3 cities in the world. 1 In "Add to home screen" menu, tap [Folder]. Display the list of frequently played movies and recommended. 2 Tap [Done]. Select an item. ❖ Information ･ If you install an application with widget from Android Market, the installed widget is added to the widget list.
Changing wallpaper 1 In "Add to home screen" menu, tap [Wallpapers]. 2 Tap [Gallery]/[Live wallpapers]/ [Sony Ericsson wallpapers]. ･ When you tap [Gallery], select an image to set to the wallpaper, pinch the cropping frame or drag it to area you want to use as wallpaper, and tap [Save]. ･ When you tap [Live wallpapers], select a content, tap [Set wallpaper]. You can also download and add Live wallpaper content from a web page.
･ If you have set a Facebook account and Facebook inside XperiaTM account, the posting screen for Facebook appears in Step 2 to post on Facebook. You can select send method by tapping "Other sharing options". Sharing shortcuts and widgets on the Home screen You can send application shortcuts and widgets on the Home screen to someone with an easy operation. You can send/post download information (URL) of applications or widgets you found without entering manually.
❖ Information ･ Alternatively, from the Home screen, tap , then tap [Search] to display search screen. ･ Tap at the left of the search box to set the search range from "All", "Web" and "Apps". ･ Tap at the right of the search box to enter a search word by voice to browse the Internet. Searchable items You can change the search range by marking/unmarking data categories (web, twitter, Apps, Music, Messaging, Contacts, Voice search) in the terminal to search.
Applications The applications displayed on the Applications screen by default are as follows. ･ Some applications require separate subscriptions (charged) to use. Icon Application Description Page ｉチャネル (i-Channel) An application to use i-Channel - Koe-no-Takuhaibin Use "Koe-no-Takuhaibin" easily and conveniently on the smartphone. You can record and play voice messages with a simple operation.
Icon Application Description Page Camera Take photos and record video clips. P.150 Email Send and receive emails (multiple accounts are also available). P.124 Market Access to the Android Market, download and buy new applications. P.168 Facebook Activate Facebook client application. P.115 Calendar Display a calendar and manage schedule. P.179 Video Unlimited Connect to Video Unlimited to download favorite videos onto the P.185 terminal. you can enjoy watching them at any place.
Icon Application Description Page SE Store Display website introducing accessories for terminals. P.184 News & Weather Receive current location information to display weather forecast or view news in categories. Downloads Display a list of downloaded items. P.112 PlayNow Access to PlayNow website to browse a variety of beneficial information. P.184 Instruction Manual Display the terminal instruction manual. You can start a function P.2 you want to use from the explanation.
Icon Application Description Page Get games Display a list of games you can play with XperiaTM PLAY to buy, download some. P.148 OfficeSuite Browse and read Office documents. P.183 XperiaTM PLAY Display a list of games you can play with XperiaTM PLAY to buy, download, play some. P.148 Voice Search Use Google search by voice input. P.47 SE Home Website for smartphones where products of Sony Ericsson and the campaign information are provided.
Icon Application Description Page Evernote Launcher Save various information such as website contents, shot images, idea memos to the server to search/view at any time you want it. Saving or viewing information can be available not only from the terminal but also PC or other devices. - 書籍・コミック E ★エブリスタ (Books, comics E ★EVERYSTAR) View high-profile electronic books, electronic comics, etc. ranged from original works by professional authors/famous people to general user posted popular works.
Icon Application Description Page G ガイド番組表 (G View ground-based broadcasting, BS digital broadcasting. Guide program table) Searching programs by key words or categories and remote recording from outside the home are available. - life.episodeTM View the latest information such as news and music. VirusScan (docomo Anshin Scan) An application to protect the terminal from virus. Detect virus hidden in installed applications or microSD card. - Campaign Navi View campaign information for Xperia.
Sorting applications You can sort the applications displayed on the Applications screen from the "Arrange apps" menu. 1 On the Applications screen, tap . ･ "Arrange apps" menu appears. Own order Select an application icon to sort. (P.55) Alphabetical Sort in alphabetical order. Most used Sort in frequency order. Recently installed Sort in install date order. Selecting an application to move 1 2 On the Applications screen, tap , then touch and hold an application icon you want to move to drag.
Opening the recently used applications window You can view and access recently used applications from this window. 1 Press y for over a second. ･ A recently used applications appear on a list. 1 On a character entry screen, touch and hold the text box. 2 Tap [Input method] X [International keyboard]/[Japanese keyboard]. ❖ Information ･ You can change Input method (keyboard type) during character entry.
■ QWERTY keyboard ■ Japanese syllabary keyboard Japanese characters can be entered in "Romaji input" mode. Japanese characters can be entered in "Kana input" mode using keys arranged according to the Japanese syllabary. Portrait Portrait Landscape ■ 12 key keyboard Japanese characters can be entered in "Kana input" mode. Landscape Switching the keyboard Portrait Landscape 1 On the character entry screen, touch and hold the character mode icon . 2 Tap / / / / .
･ Tap to display plug-in applications list. Tap [ 定型文 (Fixed phrase)] or [Contact Picker 2.3] to quote. ❖ Information ･ The QWERTY keyboard is set by default. Also, "Popup on key press", "Auto capitalization", "Word suggestions" and "Error correction" are set to on. Entering characters on the QWERTY keyboard Use the QWERTY keyboard to enter Japanese characters in "Romaji input" mode.
Icon *2 Function Fix input characters and converted characters. When characters are already fixed, enter a line feed at the cursor position. Delete the character before the cursor. Touch and hold to delete characters continuously. 1 On the character entry screen, touch and hold the character mode icon . 2 3 Tap . Tap [On-screen keyboard settings] X [Select display keys]. ･ If the assistant keyboard (P.
2 3 Tap . Tap [On-screen keyboard settings] X [Change symbols]. ･ A list of 12 symbols to be displayed on QWERTY keyboard appears. 1 On the character entry screen, touch and hold the character mode icon . 2 3 Tap 4 . Tap [On-screen keyboard settings] X [Choose key type]. Tap any of [Static key resizing]/ [Key highlight while typing]/ [Dynamic key resizing with highlight]/[Off]. ■ Static key resizing Widen frequent using key for easy tapping.
■ Dynamic key resizing with highlight Widen the key that is predicted for the next entry much further and highlight it. Entering characters on the 12 key keyboard Use the numeric keyboard to enter Japanese characters in "Kana input" mode. The main functions of the touchkeys ■ Off Display equally the width of each key. ･ To change character modes and other entering operations, tap the following icons on the 12 key keyboard.
Icon Function Tap to display one-byte symbols/twobyte symbols list and enter them. Switch the tab to display smileys list and enter them. (While entering an spmode mail, pictogram tab also appears.) A list of plug-in applications appears Touch and and you can activate the plug-in application. hold Appears before conversion is fixed to switch conversion methods (" 予測変換", " 直変換 "). And display conversion candidates for alphanumeric characters allocated to the tapped key.
･ Ex: Entering characters in "な " column You can enter " な " only by tapping. Flick left for " に ", up for " ぬ ", right for " ね " and down for " の ". Flick up ぬ Flick left に な Tap ね Flick right の Flick down ･ To switch upper/lower case or change to voiced sound, flick or tap . ･ Flick input is available by default. You can cancel by the following operation beforehand. a From the Home screen, press t and tap [Settings]. b Tap [Language & keyboard] → [Japanese keyboard] → [On-screen keyboard settings].
Entering characters on the Japanese syllabary keyboard Icon Tap to display one-byte symbols/twobyte symbols list and enter them. Switch the tab to display smileys list and enter them. (While entering an spmode mail, pictogram tab also appears.) You can use the software keys arranged according to the Japanese syllabary to enter Japanese characters in "Kana input" mode.
Icon / Function Paste In alphanumerics input mode, tap to switch between upper case and lower case or switch to symbols which can be entered from the keyboard. Appears in landscape view. Change settings of Japanese keyboard. *1 When any characters are entered, just tap the desired position on the entered character string to move the cursor. *2 " 確定 (Fix)" is displayed before conversion is fixed.
Settings of Japanese keyboard Common on-screen keyboard settings You can make keyboard settings such as Key sound, Vibrate, etc. 1 From the Home screen, press t and tap [Settings] X [Language & keyboard] X [Japanese keyboard]. ･ The setting screen for Japanese keyboard appears. 2 Auto capitalization Set to automatically capitalize the top letter you enter in English input mode. 1 From the Home screen, press t and tap [Settings] X [Language & keyboard] X [Japanese keyboard].
Word suggestion settings The Word suggestion function shows predicted conversion candidates when you enter Japanese/English characters. Mark the checkbox of Word suggestion checkbox to set options "Error correction" and "Auto space" These options help you entering characters with ease. Setting Word suggestions 1 2 3 From the Home screen, press t, then tap [Settings] X [Language & keyboard]. Tap [Japanese keyboard]. Mark [Word suggestions] checkbox.
Registering words in user dictionaries There are 2 types of user dictionaries: "My words Japanese" (Kana/Kanji) and "My words English" (one-byte alphabet). 1 From the Home screen, press t, then tap [Settings] X [Language & keyboard]. Editing user dictionary 1 On the user dictionary screen, select a word you want to edit. 2 3 Press t, then tap [Edit]. Edit the content and tap [Save]. Deleting words from user dictionary 2 3 Tap [Japanese keyboard]. Tap [My words Japanese]/[My words English].
❖ Information ･ To delete learned words individually, touch and hold a word you want to delete and tap [学習デー タ削除 (Delete learned word)]. Backing up and restoring dictionary User dictionary and Words by learning can be backed up onto a microSD card and restored when needed. 1 From the Home screen, press t and tap [Settings] X [Language & keyboard]. 2 Tap [Japanese keyboard] X [Backup & restore]. 3 4 Tap [Backup]/[Restore]. 5 Tap [Go].
Adding a category of phrases Add a new category and register a phrase. 1 From the Home screen, tap , then tap [ 定型文 (Fixed phrase)]. A list of categories appears. 2 Press t, then tap [ カテゴリー追 加 (Add category)]. 3 Enter the category name and tap [OK]. 4 Tap [ 新規追加 (Add phrase)] and enter a phrase. 5 Tap [OK]. ❖ Information ･ When you tap each category, a list of registered phrases appears. Tap a phrase to edit/delete.
Calling/Network Services Making/Receiving calls Making a call Entering pause (,) This function allows you to operate voice mail at home, to reserve tickets or to check the balance of a bank account, etc. 1 From the Home screen, tap [Phone]. 1 From the Home screen, tap [Phone]. 2 Enter the number of the recipient and tap [Call]. 2 Enter the number of the recipient and touch and hold the asterisk (*) key until a comma (,) appears.
❖ Note ･ In Japan, when UIM is not inserted to the terminal, the emergency numbers of 110, 119, 118 are not available. ･ This terminal supports "Emergency call location information". If you make a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.
2 Touch and hold [0] key until "+" sign appears. ･ When making an international call, "+" is replaced by an international access code. 3 Enter the country code X Area code X A phone number of recipient and tap [Call]. ･ If the area code begins with "0", omit "0". However, "0" may be required to dial to some countries or areas such as Italy. ❖ Information ･ The icon appears even during the screen lock or key lock, and you can decline a call by the same operation.
■ Making a call 1 Make a call with Stereo Headset with Microphone connected. ･ An operation of making call is the same as usual operation. (P.71) 2 Press the switch to end the call. ■ Receiving a call 1 While receiving a call, press the switch of Stereo Headset with Microphone. ･ The call is connected. ･ When receiving a call, you can decline the call by pressing the switch for over a second. 2 To end a call, press the switch again. Adjusting the ear speaker volume 1 Press m during a call.
i End call Operations during call t: During a call, press t and tap [Hold], while a call is on hold, press t and tap [Retrieve call]. ･ To set a call on hold, "Call waiting" subscription is required. (P.88) ■ Calling screen a e b c f g d h ❖ Note ･ Do not bring the terminal close to your ear with the speakerphone ON to avoid hearing damage. Call log i a A photo saved in Contacts b Name of the other party c Speaker: Set speakerphone on/off.
Adding a number from the call log to your contacts 1 From the Home screen, tap [Phone] X [Call log]. 2 Tap and hold the number, then tap [Add to Contacts]. ･ You can select [Add to Contacts] from the menu displayed when you tap the number. 3 Tap desired contact, or tap [Create new contact]. ･ Tap [Create new contact] to display a screen for selection of the saving locations appears. You can select Phone contact or docomo account as the saving location. 4 Edit the contact details and tap [Done].
･ If the screen orientation does not change automatically when you turn the terminal sideways, from the Home screen, press t and tap [Settings] X [Display], then mark [Auto-rotate screen] checkbox. * Depending on the usage, it may be different from online display of Google Talk. Managing contacts Adding a contact Contacts list screen On the contacts list screen, you can view details of your contacts.
Using shortcuts of Contacts When you tap the photo (image) part on contacts list screen, shortcuts for phone number, mail, etc. appear. Tap the shortcut to make a call, or create and send a mail. Make a call to saved phone number. "Info" filter (P.82) screen of the contact appears. Changing display conditions for contacts Press t and tap [Filter] on the contacts list screen to set display items, saving location (docomo, phone contact) and whether to show or hide for each account.
･ When you tap the image (photo) part of the contact, contact shortcuts appear (P.78). Tap to display "Info" filter screen. 2 3 Tap [Edit]. ･ By tapping (Add field) on the editing screen, you can add information to enter. Edit the desired information and tap [Done]. Linking contacts Deleting contacts 1 On the contacts list screen (P.77), press t, then tap [Delete contacts]. 2 Mark the contacts you want to delete. ･ If you want to delete all contacts, tap [Mark all]. 3 Tap [Delete] X [OK].
3 4 Enter the new information or make the changes you want. 4 ･ By tapping (Add field) on the editing screen, you can add information to enter. ❖ Information When you are done, tap [Done]. ❖ Information ･ In "Myself", you can add multiple phone numbers, emails, etc. The history of dialed/received calls to/ from the registered phone numbers is displayed in "Calls" of "Info" filter (P.82) screen.
Setting a photo to a contact 1 On the contacts list screen (P.77), tap the contact. 2 3 4 Tap [Edit]. 5 Tap 1 ･ The screen for basic settings for synchronization and account management appears. If you do not have an account yet, you can tap [Add account] to set. (P.115) . Tap [Gallery]/[Take new photo]. ･ Select [Gallery] to select a saved photo and add it. ･ Select [Take new photo] to shoot a photo and save it. Tap [Done]. 2 Tap an account name. 3 Tap [Sync Contacts].
2 Tap an item you want to display. ･ Tap [All] to show updating status information of all networking services. If 2 or more service links are set, single information of the most recently updated account can be seen. ･ Tap [Off] not to display status updating information. Dialing Service dial number 1 On the contacts list screen (P.77), press t, and tap [Settings] X [Service dial number]. ･ Service dial number ( ドコモ総合案 内・受付 (General Inquiries), ドコモ 故障問合せ (Repairs), etc.) saved on the UIM appear.
Exporting all contacts on microSD card 1 2 4 Tap [OK]. ❖ Information On the contacts list screen (P.77), press t, then tap [Back up contacts] X [Memory card]. Tap [OK]. ･ Some part of data may not be imported or exported depending on the contacts. Exporting names and numbers on UIM ❖ Information 1 On the contacts list screen (P.77), press t, then tap [Back up contacts] X [SIM card]. Importing contacts from microSD card 2 Mark the contacts you want to copy.
Importing contacts from UIM 1 On the contacts list screen (P.77), press t, then tap [Import contacts] X [SIM card]. 2 Tap [docomo]/[Phone contact]. 3 ･ When you set Google account etc., it appears as an import destination. 1 Attach a microSD card to the terminal. 2 On the " エクスポート (Export)" tab screen, tap [ 開始 (Start)]. ･ The Contacts data saved in docomo account is saved onto the microSD card. To import one contact, tap the contact you want to import.
Copying contacts registered in Google account to docomo account 1 On the "docomoアカウントへコ ピー (Copy to account)" tab screen, tap a Google account you want to copy. 2 Tap [ 上書き (Overwrite)]/ [ 追加 (Add)]. ･ Copied Contacts data is saved in docomo account. ･ You can also copy the Contacts data saved in "Phone contact" to docomo account as well as Google account. ❖ Information ･ If contact item names (e.g. Phone number, etc.
❖ Information ･ In this manual, the outlines of each network service are described with menu operations. Voice Mail Service The Voice Mail Service takes messages for you, as long as it answers a call with the answering message, if there is an incoming call when you are in a location without the radio wave, while the terminal is powered off, or when you cannot answer a call within the preset ring time.
Setting Voice Mail Service 1 From the Home screen, press t and tap [Settings]. 2 Tap [Call settings] X [Network service setting]. 3 Tap [Voicemail]. Check messages* Check if a new message is stored. After checking, the completion message appears. Notification settings Set whether to alert you of a new message with the tone or vibration. Activate Missed Call Notif.
Playing the voice message Setting Call Waiting 1 1 From the Home screen, press t and tap [Settings]. 2 Tap [Call settings] X [Network service setting]. 3 Tap [Call Waiting]. When the SMS notification "NTT DoCoMo VM:XX" appears, tap [New message] from the Notification panel (P.38). ･ A recorded message plays. 2 Follow the voice prompts to operate. Call Waiting When there is another incoming call while you are on a call, the in-call ringtone notifies you of the second call.
2 Switch to the first call. ･ To end the later call, tap [End call]. The later call is terminated and switched to the first call. ･ To put the later call on hold, tap [Switch to this call]. The later call is put on hold and switched to the first call. Tapping [Switch to this call] switches to the other party. Ending the current call and answering an incoming call 1 When you hear the beep during a call, tap [End current call and answer]. ･ The first call is terminated and the incoming call is received.
Call Forwarding Service Call charge for the Call Forwarding Service The Call Forwarding Service forwards a voice call to a preset forwarding number when you are in a location without the radio wave, the terminal is powered off, or you do not answer the call within the preset ring time. ･ When the Call Forwarding Service is set to "Activate Call Forwarding" and if you do not answer an incoming voice call, the call is saved in "Call log" as a "Missed call" and (Missed call) appears in the status bar.
3 Tap [Call Forwarding]. ･ Select items you want to use. Activate Call Forwarding Enter the forwarding number and ring time, then tap [OK] to activate the Call Forwarding Service. Change forwarding number Mark the checkbox and enter the forwarding number. Register ring time Mark the checkbox and enter the ring time (0 to 120 seconds). If the ring time is set to 0 seconds, an incoming call is not saved in "Call log". Deactivate Call Tap [OK] to deactivate the Call Forwarding Forwarding Service.
2 Tap [Call settings] X [Network service setting]. 3 Tap [Caller ID Notification]. ･ Select items you want to use. Activate Caller Enter the Network security code, ID Notification then tap [OK]. Your phone number is notified to the other party. Deactivate Caller ID Notification Enter the Network security code, then tap [OK]. The caller ID notification is deactivated. Check settings Check the current settings.
Settings Viewing the setting menu 1 From the Home screen, press t. 2 Tap [Settings]. ･ Alternatively, from the Home screen, tap tap [Settings]. , then Wireless & networks You can make network settings such as Wi-Fi, Bluetooth function, etc. ■ Setting menu Sony Ericsson ❖ Information Set Facebook synchronization function for the terminal (P.115), or make settings for connecting the terminal to a PC or another device via USB connection or Wi-Fi (P.138). Wireless & networks P.93 Call settings P.
Press t, then tap [Save]. Checking the access point you use 7 1 ❖ Information From the Settings screen (P.93), tap [Wireless & networks] X [Mobile networks] X [Access Point Names]. ･ Available access points (APN) appear. ･ It is recommended that you use the displayed access point without editing. ❖ Information ･ If you have several available connections, a marked radio button to the right indicates the active network connection. ･ Do not change the MCC/MNC.
sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on sp-mode, refer to NTT DOCOMO website. mopera U mopera U is ISP of NTT DOCOMO's Internet connection. If you have subscribed to mopera U, you can use Internet after making the simple settings. mopera U is a service requiring subscription.
❖ Information ･ You can also switch on/off of the Airplane mode by pressing and holding p for over a second to switch to the Phone options menu, then tapping [Airplane mode]. ･ Even if Airplane mode is on, Wi-Fi and Bluetooth function can be turned on. About Wi-Fi Using the Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet. ･ Even when Wi-Fi is on, packet communication is available.
Turning on Wi-Fi 1 From the Settings screen (P.93), tap [Wireless & networks]. 2 Mark [Wi-Fi] checkbox. ❖ Information ･ The next time you connect to a Wi-Fi network, the security key is saved in the terminal. ■ Wi-Fi network status icons on status bar ･ The terminal scans for available Wi-Fi networks. The following icons appear according to the Wi-Fi network connection status. Appears when connected to Wi-Fi network. ❖ Information Appears when connected to Wi-Fi network using AutoIP function.
Wi-Fi network status When you are connected to a Wi-Fi network or when there are Wi-Fi networks available in your vicinity, you can see the status of these Wi-Fi networks. You can also set the terminal to notify you when an unsecured Wi-Fi network is detected. Setting the Wi-Fi network notification to ON 1 2 4 Tap a Wi-Fi network in the list to connect to it. Advanced Wi-Fi settings Before you add a Wi-Fi network manually, you need to turn on the Wi-Fi setting. (P.
Viewing detailed information on a connected Wi-Fi network 1 2 From the Settings screen (P.93), tap [Wireless & networks] X [Wi-Fi settings]. Tap the Wi-Fi network that you are currently connected to. ･ The detailed network information is displayed. ❖ Information ･ To check MAC address and IP address, [Wireless & networks] on the Settings menu screen (P.93) X Tap [Wi-Fi settings], press t, and tap [Advanced] . 2 3 4 5 ❖ Information 1 From the Settings screen (P.
Using tethering function Tethering stands for using mobile devices such as smartphone as modem to allow USB compatible devices or wireless LAN devices to access the Internet. 1 From the Settings screen (P.93), tap [Wireless & networks] X [Tethering & portable hotspot]. 2 Connect the terminal to a PC with a microUSB cable (P.33). ･ When you connect a USB cable for the first time, driver software for the terminal is installed to the PC. Wait for a while until installation is completed.
Setting up a portable Wi-Fi hotspot You can use the terminal as Wi-Fi access point to connect up to 5 wireless LAN devices to the Internet simultaneously. 1 From the Settings screen (P.93), tap [Wireless & networks] X [Tethering & portable hotspot]. 2 3 Tap [Port. Wi-Fi hotspot settings]. Enter [Network SSID] of the Wi-Fi hotspot to set. 3 Check the cautions displayed, tap [OK]. ･ [Portable Wi-Fi hotspot] is marked.
Adding a VPN 1 From the Settings screen (P.93), tap [Wireless & networks] X [VPN settings]. 2 3 4 Tap [Add VPN]. 5 3 ･ When you are connected to a VPN, the connecting notification appears in the status bar. When you are disconnected, the notification indicating to return to the VPN setting screen appears, so that you can reconnect to. For details, see "Status bar" (P.36). Tap a VPN type to add.
Noise suppression Make the voice clear to understand for the other party during a call. Accounts Set Internet phone (SIP) account. Use Internet calling Set Internet phone (SIP) call method. Setting the terminal to silent mode 1 2 Press p for over a second. ･ Phone options menu appears. Tap [Silent mode]. ❖ Information Sound Set ringtones, operation sound, vibrator, etc.
Adjusting the volume 1 From the Settings screen (P.93), tap [Sound] X [Volume]. ･ Adjust the volume of following items. - Ringtone - Media (sounds of the Music player and Gallery) - Alarm - Notification 2 Drag the slider left or right to adjust the level. ･ Drag the slider to the left for volume down, or to the right for volume up. 3 Tap [OK]. ❖ Information ･ By default, Notification volume is adjusted to the same as Ringtone volume.
Selecting a notification ringtone 1 2 From the Settings screen (P.93), tap [Sound] X [Notification ringtone]. Select a ringtone and tap [Done]. ❖ Information ･ To set a notification sound other than the ones stored by default, you can also set from "Music library". Setting touch tones to ON 1 2 From the Settings screen (P.93), tap [Sound]. Mark [Audible touch tones] checkbox, [Audible selection] checkbox. ･ If you unmarked them, any operation tone does not sound when you touch or tap.
❖ Information ･ Even when you change the orientation of the terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc. Setting to change to landscape view 1 From the Settings screen (P.93), tap [Display]. 2 Mark [Auto-rotate screen] checkbox. ❖ Information ･ To turn the screen backlight off immediately, press p. Location & security Set options related to location information and security. Use wireless networks P.175 Use GPS satellites P.
Clear storage Delete all certificates and credential information from the credential storage*2 and reset its password. *1 Set the password to the credential storage in advance. *2 Save certificates and credential information in the credential storage. Protecting the UIM Some functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available.
* For information on "My docomo", see the previons page of the last page of this manual. PIN code You can set a security code called PIN code to the UIM. The code is set to "0000" at the time of subscription. It can be changed by yourself. PIN code is a 4- to 8-digit number (code) that must be entered for user confirmation to prevent unauthorized use by a third party every time you insert the UIM into the terminal or when the terminal is powered on.
❖ Information ･ Even if you do not unlock the SIM card lock, you can make an emergency call by tapping [Emergency call] on the unlock SIM card lock screen displayed after unlocking the screen. For details, see "Emergency call" (P.71). Changing the PIN code ･ You can change the PIN code when the UIM PIN is enabled. Screen lock You can secure your data by requiring a screen unlock pattern every time the terminal is turned on or every time it is activated from sleep mode.
･ When you tap [Password], follow the onscreen instructions to enter 4 or more characters including alphabets. Changing the screen unlock method 1 From the Settings screen (P.93), tap [Location & security] X [Change screen lock]. ･ Enter current screen unlock pattern, PIN or password. ･ If you should fail 5 times when you enter the unlock pattern, wait 30 seconds and then try again. 2 Tap [Pattern]/[PIN]/[Password]. ･ Select items you want to change into. For setting procedure, see Step 2 (P.
❖ Information ･ Tap [Try again] to retry entering pattern in 30 seconds. ･ Alternatively, when you tap [Try again] X [Forgot pattern?], the question screen that you set unlock pattern appears. ･ You can set multiple Google accounts. To unlock the screen with Google account and password, enter one of those accounts. Running services Display/Manage the currently running services. Storage use Display size of all applications, usage condition, etc.
Checking downloaded applications You can check data downloaded from websites, such as unknown source's applications, in the following steps. 1 From the Home screen, tap [Browser]. 2 Press t, tap [More] X [Downloads]. ❖ Information ･ Alternatively, you can tap from the home screen X [Downloads] to check applications. ･ Applications downloaded from Android Market do not appear. Managing your applications Manage and delete installed applications, display memory usage condition, etc.
Deleting all data of the application ･ Before deleting all installed application data, back up contents related to the application that you want to save including data saved in the application. 1 From the Settings screen (P.93), tap [Applications] X [Manage applications]. 2 Tap an application to delete the data. 3 4 Tap [Clear data]. Tap [OK].
Accounts & sync You can manage (add or delete) online service accounts or synchronize contacts, messages, etc. saved in online services with the terminal. Background data All the applications installed to traffic the terminal perform automatic data communications. Activate autosync Synchronize online information such as your Gmail, calendar, contacts, etc. automatically. (P.116) Manage accounts P.114 Managing accounts You can add or delete an online service account.
･ Make sure to check if the data connection is available before sign-in to the Google account. For checking the data connection status, see "Status icons" (P.36). Setting Facebook account When you register or sign in Facebook, you can synchronize (register/update) profile information published by "Friend" online to Contacts.
Setting other account ■ Exchange Active Sync account ･ If you have Exchange ActiveSync account, on the settings screen (P.93), tap [Accounts & sync] X [Add account] X [Exchange Active Sync], and then set the settings according to the onscreen instructions. ■ docomo account ･ docomo account helps you to use "Phonebook backup" service (P.52) provided by NTT DOCOMO. a docomo account is set by default. Deleting a service account 1 2 From the Settings screen (P.
6 Tap to mark an item for automatic synchronization. ･ If the items to be synchronized are marked and checkboxes are led by , synchronization starts. If no appears, press t and tap [Sync now] to start synchronization. ❖ Note ･ If you mark [Background data traffic] checkbox, all the applications installed to the terminal are permitted automatic data communications to online services whose accounts are set.
❖ Note ･ While restarting or resetting the terminal, wait for a while. Note that, if you remove the battery pack while restarting or resetting, it may cause malfunction of the terminal. Managing memory Formatting a microSD card 1 Storage You can check memory space of microSD card and terminal, and initialize microSD card. From the Settings screen (P.93), tap [Storage] X [Unmount SD card]. ･ If the confirmation screen appears, tap [OK]. Total space Check memory of microSD card.
Increasing the free volume of the terminal and a microSD card If the terminal has a small memory, you can do the following to increase the available memory: ･ In the browser, you can clear all temporary Internet files and browser history information. For details, see "Clearing history" (P.137). ･ Uninstall programs that you no longer use. For details, see "Deleting an installed application" (P.113). Language & keyboard You can select language and keyboard input. Select language P.
Language Set language for reading out text. Pico TTS* Make settings for installed voice synthesis engine. * Japanese is not supported. Accessibility You can set call end operation and user support service which sounds or vibrates according to user's operation. Date & time You can change the date and time in the terminal. To set date, time zone and time manually, unmark "Automatic" time setting (Use network-provided values) under Date & time settings.
Setting the time zone Setting the date format 1 From the Settings screen (P.93), tap [Date & time] X [Select time zone]. 1 From the Settings screen (P.93), tap [Date & time] X [Select date format]. 2 Tap an item to set. 2 Tap an item to set. Setting the time About phone 1 From the Settings screen (P.93), tap [Date & time] X [Set time]. 2 Tap numbers to adjust the hour and minute. Software update P.201 ･ When you unmark [Use 24-hour format] checkbox, you can change AM/PM.
Mail/Internet 3 sp-mode mail You can send/receive mails using i-mode mail address (@docomo.ne.jp). You can use pictogram and Deco-mail. Mails can be received automatically. For details on sp-mode mail, refer to " ご利用ガイドブック (spモード編) Mobile Phone User's Guide [spmode] (in Japanese only)". 1 From the Home screen, tap [sp モー ドメール (sp-mode mail)]. ･ After this step, follow the onscreen instructions.
･ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number". Enter the phone number without a leading "0", if any. You can also enter "010", "Country code" and "the recipient mobile phone number" to send messages (To reply to the received SMS overseas, enter "010"). Receiving and reading messages (SMS) 1 From the Home screen, tap then tap [Messaging]. 2 Tap someone whose messages you want to read from the recipient list.
Notification vibration Set if you want to receive a notification by vibration when a new message arrives. SIM messages Manage messages saved to UIM. Push settings Reports of message settings can be received from the provider. 2 Press t, then tap [Delete several]. 3 Tap [Mark all] X [Delete]. ･ After tapping [Mark all], you can tap individual thread to unmark. Tap [Unmrk all] to unmark all of the threads. Deleting a message 1 From the Home screen, tap then tap [Messaging].
4 Enter account name and a name you want to display on outgoing mails. 3 ･ Tap to display the Contacts list screen to select among the registered contacts. ･ If you enter an alphabet or a name, email address options appear from the contacts beginning with the entered character. ･ To add a Cc or Bcc, press t and tap [Add Cc/Bcc]. ･ If you enter characters directly for multiple email addresses, separate with a comma (,) and then enter the next email address.
Add sound Select music: Select a saved music file. Sound Recorder: Record a voice message and attach it. ･ Only image/video/music file (up to 5 MB) can be attached to email. 7 Tap [Send]. ❖ Information ･ You can save the message as a draft by tapping [Save draft]. Also, when you move to the other screen while creating a mail, the mail is automatically saved as draft.
2 Press t, then tap [Preview pane]. ･ You can set the following options. Off Inbox is not shown piecewise. On Tap in portrait view or in landscape view to cut the Inbox to show the selected mail body. ❖ Information ･ If you have two or more accounts, change made in any of the accounts applies to all accounts. Saving email message attachment 1 From the Home screen, tap then tap [Email]. , ･ When an account list appears, tap and select an email account whose attachment you want to save.
2 Deleting an email message 1 From the Home screen, tap then tap [Email]. , ･ When an account list appears, tap and select an email account whose email you want to delete. 2 Touch and hold an email, then tap [Delete]. ❖ Information ･ To delete multiple emails at the same time, tap checkboxes at the left of the mails you want to delete and then tap at the bottom of the screen.
Adding an extra email account 1 From the Home screen, tap then tap [Email]. , ･ When a screen other than account list, press t and tap [Accounts]. 2 3 Press t, tap [Add account]. Enter your email address and password. ･ If required, mark [Send email from this account by default.] checkbox. 4 5 Tap [Next]. ･ To make the email account settings manually, tap [Manual setup] and follow the onscreen instructions. Enter an account name and name you want to display on outgoing messages.
4 Using mopera U mail mopera U users (for the setting, see "Setting mopera U" (P.95)) can use mopera U Mail. In mopera U Mail, POP mail and IMAP mail are available. The mail box supports 50 MB. Also, the Web mail system is available. ■ POP mail 1 From the Home screen, tap then tap [Email]. 2 ･ If you tap [Next] in Step 2, "mail.mopera.net" is entered in the POP3 server field. 5 Select the security type. 6 On the security selection screen, mark the security radio button to be used.
10 11 On the option setting screen, set frequency of checking Emails etc. and tap [More]. On the mail account registration screen, enter a name you want to display on outgoing messages, then tap [Done]. ･ The mailer is displayed and the set mail account is available. 2 On the inbox, press t and tap [Refresh]. ･ Synchronizing Gmail application in the terminal with your Gmail account starts, and the Inbox is refreshed.
❖ Information ･ For details of Google Talk, on the Google Talk screen, press t, then tap [Settings] X [Terms & privacy] X [Help Center] (Talk Help is displayed in English). Early warning "Area Mail" Early warning "Area Mail" is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area mail is a free service for which subscription is not required. ･ You cannot receive Area Mails in the following case.
2 Press t, then tap [Settings]. Receive Area Mail Set whether to receive Area Mails. Register Area Mail To receive Area Mails other than early warning, register the name of Area Mail about which you want to receive information and Message ID. Up to 20 items can be registered. t and tap [Settings] X [Display], then mark [Auto-rotate screen] checkbox. Moving to a web page 1 2 Sound in silent Set whether to sound a dedicated mode ringtone even in silent mode.
Displaying web pages Browser offers advanced features that let you view web pages like on a PC. Opening a new browser window You can open up to 8 browser windows. 1 While viewing a web page, press t, and tap [New window]. ･ A new browser window opens in the default home page. Switching between browser windows Zooming in/out a web page To zoom in/out a webpage, perform any of the following operations. ･ Double-tap at the point you want to zoom in/ out.
3 Tap to close the search bar. Auto-fitting a web page Copying text from a web page Adjust display size of web pages automatically to fit the screen. 1 While viewing a web page, press t, then tap [More] X [Select text]. 1 2 Place your finger at the start of the text you want to copy and then drag to the end of the text you want to copy. ❖ Information 3 ･ Some web pages cannot be adjusted automatically. ･ Copied text is highlighted in orange.
Operating links Operating links in web pages 1 Open the web page you want to operate the links. 2 To open the web page, tap the link. ･ The links get enclosed in an orange box when selected. ･ If you touch and hold the link, the menus, "Open", "Open in new window", "Bookmark link", "Save link", "Share link" and "Copy link URL", appear. When you touch and hold an image or a link contained image, "Save image", "View image" and "Set as wallpaper" also appear.
❖ Information ･ You can also bookmark the page by pressing t and tapping [Bookmark last-viewed page] in the bookmark list screen. ･ Tap [Most visited]/[History] tab in the bookmark list screen and tap on the right side of the record. turns into and the web page is added to the bookmark list. Checking browsing history 1 On the Browser screen, press t, then tap [Bookmarks] X [History] tab. 2 Tap the time you browsed the web page, such as [Today], [Yesterday], etc.
File management Handling a file Files in the terminal should be operated on the file handling application. For example, to delete files saved in the microSD card, use the deletion function of the applications such as Music player or Gallery. With "Share" function of each application, you can exchange the files via Bluetooth or by email file attachment sending to/receiving from the other compatible devices.
2 Tap [Skip]. ･ The terminal is connected to a PC in "Media transfer mode (MTP)", USB connection mode set by default. Follow the onscreen instructions on the PC to access "Memory Card" in the terminal. ❖ Information ･ Drag the status bar when connecting and tap [Connected in Media transf. mode] X [Connectivity settings] to check connectivity or change the following connection settings.
Disconnecting the microUSB cable safely Dragging and dropping data on the terminal and a PC ･ Do not disconnect the microUSB cable during data transferring. Otherwise, data may be damaged. ･ If you connect the terminal in the Media transfer mode (MTP), make sure that data transfer is not in progress and just disconnect the microUSB cable. ■ Media transfer mode (MTP) 1 ･ "Connected in Media transf. mode" appears in the status bar. 2 ■ Mass storage mode (MSC) 1 Drag the status bar downwards.
Connecting the terminal to a PC on a Wi-Fi network If the terminal and a PC*1 are connected in a pair on a Wi-Fi network, automatic connection/disconnection of microSD card and a PC is enabled when the terminal user comes in and out of the Wi-Fi area, You can easily access to a microSD card inserted in the terminal from a connected PC. *1 Use Microsoft Windows 7 to make a pair setting. Pair setting cannot be made under Microsoft Windows XP, Microsoft Windows Vista or other OS.
❖ Information ･ From the Home screen of the terminal, press t and tap [Settings], X [Sony Ericsson] X [Connectivity] to display "Host name" (PC name) in the "Trusted devices for wireless media transfer" field. Tap the host name and tap [Forget] to cancel connection setting. Until "Forget" is tapped, the connection setting retains even if you connect/ disconnect repeatedly by coming in and out of a Wi-Fi area.
Transferring data using Media Go 1 Connect the terminal to a PC using a microUSB cable. 2 Drag the status bar down to check the USB connection mode. ･ When "Connected in Media transf. mode" is displayed, go to Step 5. When "Phone memory card connected" is displayed, go to Step 3. 3 Tap [Phone memory card connected]. 4 Tap [Connectivity settings] X [USB connection mode] X [Media transfer mode (MTP)] X [OK]. 5 Select Media Go from the PC's start menu and activate Media Go.
･ Keep the Bluetooth device over 10 meters away from a wireless LAN device. ･ Within 10 meters, turn off either the Bluetooth device or the wireless LAN device. * The terminal does not communicate wirelessly with all types of Bluetooth devices. Bluetooth DUN is not supported. Making the terminal detectable with the Bluetooth function ON 1 From the Home screen, press t. 2 Tap [Settings] X [Wireless & networks]. 3 Mark [Bluetooth] checkbox.
Once you have made pair setting for your terminal and a Bluetooth device, the setting is saved. When making pair setting for the terminal and a Bluetooth device, you may need to enter a pass code (PIN). Your terminal will automatically try the generic pass code 0000. If this does not work, see the documentation of your Bluetooth device for the pass code used by your Bluetooth device. You do not need to re-enter the pass code the next time you connect to a paired Bluetooth device already set.
3 Touch and hold a Bluetooth device name that you are going to connect. 4 ･ Touch and hold a device with "Pair with this device" displayed under the device name. 4 Tap [Pair]. ･ Depending on the device type, connection status is displayed under the device name when pair setting is completed. While connecting to a device, appears in the status bar. Deactivating the connection of a Bluetooth device Tap [Disconnect].
Sharing files with DLNA devices via Connected devices (Media server) With Media server, you can share media files with other client (DLNA: Digital Living Network Alliance) devices using Wi-Fi function. Set Wi-Fi connection (P.96) with another client device. Setting Connected devices (Media server) 1 2 From the Home screen, tap , then tap [Connected devices]. Server information Rename the terminal (server) on a client device. Share contents Set to connect from client devices to the terminal via Wi-Fi.
Games Use the terminal as a gaming console Use XperiaTM PLAY or PlayStation®pocket to enjoy playing games with the terminal. ･ Some games require downloading a large volume of data before using, they may be downloadable only via Wi-Fi connection. In that case, turn Wi-Fi connection to ON and then download it. ･ When you try to download games from other than Android Market, downloading may be blocked because of security protection.
･ Press the × button to go back to the previous screen. ･ Tap [More games] tab to display the list of downloadable games. For the first time to tap [More games], a message confirming whether to agree to the privacy policy appears. Tap [Agree]. ･ Tap to search games for XperiaTM PLAY in the Android Market. 4 Using PlayStation®pocket Use PlayStation®pocket to enjoy playing games for PlayStation with the terminal. 1 X ･ A list of PlayStation ®pocket games appears. 2 Operate a game.
Applications Using the camera You can take a photo or record a video by tapping the screen. You can hold the camera horizontally or vertically. Photos and videos are saved automatically in the microSD card. Before using the camera ･ You must install a microSD card before you use the camera. All pictures or videos that you capture on your terminal are stored on the microSD card. You cannot take a photo while the microSD card reads/writes data, for example transferring a file from Media Go.
f Shutter (Photo) Start/Stop recording (Video) g Flash mode h Select camera i Video quality (Video) j Recording time for video (Video) Shooting screen and key operations ■ Still image shooting screen ab c d ❖ Information ･ Tap x to turn off the camera. e f Taking photos Taking photos g h 1 ■ Video shooting screen ga c ･ If the still image shooting screen does not appear, tap .
･ When you connect Stereo Headset with Microphone (sample), commercially available earphone set or other Bluetooth device, shutter sound may be softer. Taking a photo using in-camera 1 2 On the shooting screen, tap (Select camera), and then tap [Front]. Tap Changing the capturing settings 1 ･ If the still image shooting screen does not appear, tap . 2 . ･ When using the in-camera, "Picture quality", "Color effect", "Camera setting", "Store location" and "Select camera" can be set.
Still camera settings Item Focus Settings mode Icon/Value Item Description Scene Settings mode Icon/Value Portrait Set focus controls. Auto Infinity Macro The camera automatically focuses on a selected subject. The focus frame turns to green when focus is on. Use when shooting at a distance. Focus on subjects far away. Subjects close to the camera may be blurred. Night Shoot a crisp and clear night scene. Due to long exposure time, be careful not to shake camera.
Item Picture Settings size Icon/Value Description Select image sizes before shooting. An image with a higher resolution requires more memory. ･ Aspect ratio is 4:3 only. ･ For in-camera, VGA (0.3 megapixel) only. Item Icon/Value Color Settings effect 5M Pixels Approx. 5 megapixel image size (2592 × 1944) 3M Pixels Approx. 3 megapixel image size (2048 × 1536) 2M Pixels Approx. 2 megapixel image size (1600 × 1200) 1M Pixels Approx. 1 megapixel image size (1024 × 768) VGA Picture quality Approx. 0.
Item White balance Icon/Value Description The white balance setting adjusts the color balance according to the light source. Auto Adjust the color balance for a sunny place. Adjust the color balance for Fluorescent lighting like fluorescent. Cloudy Flash mode Adjust the color balance for a cloudy sky or shaded area. Set whether to turn on the flash when shooting when lighting conditions are poor or when there is a backlight.
Recording videos using in-camera 1 2 3 On the shooting screen, tap (Select camera), and then tap [Front]. Tap to start recording. Tap to stop the recording. ･ The recording data is automatically saved in the microSD card. ❖ Information ･ When using the in-camera, "Color effect", "Camera settings", "Video quality", and "Select camera" can be set. The in-camera does not support other video recording settings (P.157).
3 Tap an option in the selected setting. ･ The setting option icon displayed on the shooting screen changes to the set one (Except for ). Item White balance Color Settings effect Camera settings White balance Icon/Value Description Flash mode Shoot without special effect. Mono Shoot in monochrome. Sepia Shoot in sepia tone. Negative Shoot negative/ positive in reverse. Solarize Shoot with solarization effect. Restore defaults Reset the camera settings to the default.
Item Select camera Icon/Value Description Switch shooting camera between outcamera (Back)/in-camera (Front). Back Shoot with out-camera on rear side of the terminal. Front P.156 ❖ Note ･ Some settings cannot be used in combination with one another. Playing multimedia content You can play music files on "Music" and view photos and video files on "Gallery".
Copyright protected content Avoid copyright infringements when you handle photos taken with the terminal, e.g. copy/edit. In addition, avoid rights infringements of portraits by using these photos without consent, altering them or by other means. Note that capturing or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use. Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones.
❖ Information ･ When you listen to Music player with Stereo Headset with Microphone connecting to the terminal, you can switch ON/OFF by pressing the switch of Stereo Headset with Microphone. However, operation may differ depending on the conditions of use. ･ If receiving a call when using Stereo Headset with Microphone, music stops, and resumes when the call ends. 1 ･ The following album list screen appears by default.
■ Album list screen 2 b Press t and tap the displayed menu. ･ You can perform the following operations. a Share Select a transfer method and send photos/videos. Delete Delete selected photos/videos. Details xDisplay title, type, date, album name, location, etc. Select all Select all files in album. c a Camera album b Camera button: Tap to activate the camera. c Album list Deselect All Cancel all files in the album. More Rotate Left: Rotate a picture 90 degrees counterclockwise.
❖ Information ･ Press t while selecting a file, tap [Share] X [Play on Device] X [OK] to display Play on Device setting screen (if you do not connect to the Wi-Fi network, tap [Not connected] to open Wi-Fi setting screen). Connect to the Wi-Fi network, select a searched device from the list on the player device selection screen and tap [Play] to share the file between a DLNA device and the terminal.
Playing a video 1 From the Home screen, tap [ メディ ア (Media)] X [Gallery]. 2 Tap an album. 3 ･ The file list screen in the album appears. appears on the moving picture file. b Progress bar: Display the playback position in the playback duration. c Marker: Playback position. Drag to change the playback position. d [Play/Pause] key e [Fast forward] key: Fast-forward the playing position. Adjusting the volume of a video 1 Tap a video to play it.
Playing YouTube video 1 From the Home screen, tap then tap [YouTube]. , ･ When you use for the first time, agree to "Terms of Service". ･ YouTube playback screen and list screen of videos appear. ･ You can also press t and tap [Browse] to select a video from each category. 2 Tap a video to play it. ･ While playing a video, tap the screen to display the play control keys which you can switch Play/Pause. Doubletap to switch landscape/portrait.
Music player You can browse and listen to your music, playlists and podcasts using Music. ■ Music player screen e a b Playing music Tap on the Music player screen, you can browse and play audio content saved in microSD by detailed category. i ❖ Note ･ Do not perform "Unmount SD card" while a track is playing. 1 f g h c d From the Home screen, tap [ メディ ア (Media)] X [Music]. ･ The Music player screen appears. 2 3 Tap 4 Tap a track to play it. .
･ Touch and hold a track to display menu for sharing the track, adding to a playlist, registering incoming ringtone, deleting, etc. ･ Tap [Save] to save the tracks displayed in the list to a playlist. ･ Drag at the left side of tracks to change the order of tracks in the list. ･ To add a track to the list, touch and hold a track you want to add from Artists/Albums/Tracks/ Playlists categories and then tap [Queue artist]. m: Adjust the volume.
3 Touch and hold a track you want to delete. ･ To delete two or more tracks, on the list screen, press t, tap [Delete several], then mark tracks you want to delete. 4 Tap [Delete] X [Delete]. Using a track as a ringtone 1 On the Music player screen of the Music player, press t. 2 Tap [Set as ringtone]. Playlist In Music player, playlists named "Newly added", "Most played" and "Never played", are automatically created. You can also create new playlists with your desired tracks.
Using TrackID results TrackID TrackID is a music recognition service. You can search for title, artist and album name for a track you hear playing through a loudspeaker. For best results, use TrackID in a quiet area. You can recommend tracks to others. You can also search for and view related content on YouTube. If you cannot use TrackID, see "Wireless & networks" (P.93) to check the Internet connection. Starting TrackID 1 From the Home screen, tap then tap [TrackIDTM].
･ To use Android Market, you need to set Google account (P.114). ･ Some applications and games are free of charge, and the others are paid. In the applications list of Market, distinction between free and paid is clearly specified. For details on purchasing, returning and refunding of paid applications, see "Help" (P.169). ･ Some applications automatically perform packet communications. Packet communication is kept active unless you disconnect it or the time-out is occurred.
❖ Information ･ To use docomo market, Internet connection by packet communication (3G/GPRS) or Wi-Fi is required. ･ For accessing docomo market or downloading applications introduced in docomo market, a packet communication charge is applied separately. Some downloaded applications automatically perform packet communications. ･ The introduced applications on docomo market include charged ones.
Setting up Timescape Timescape screen ･ The first time you start Timescape, a setup wizard will guide you the necessary steps to set up account. 1 From the Home screen, tap then tap [TimescapeTM]. a , b ･ The Timescape screen appears. 2 3 Tap a tile. 4 Tap [Done]. If you want, enter your Facebook/ Twitter/mixi account information. ❖ Information ･ Timescape also can be started by tapping under the Timescape widget.
Posting to Facebook, Twitter, mixi from Timescape Filter icons Filter Icon Displayed tile All tiles Received SMS Missed calls 1 In the Timescape screen, press t and tap [Update status]. 2 Mark the service you want to post and tap [Continue]. 3 Enter the text and tap [Post]. Updates from your Twitter contacts Updates from your Facebook contacts Updates from your mixi contacts Filtering the displayed tile 1 Tap the filter icons on the Timescape screen.
Calling back from Timescape when you have a missed call Viewing the registered information of contacts in Timescape 1 On the Timescape screen, tap tile. 1 On the Timescape screen, tap a tile. 2 3 Tap the tile again. 2 Tap Tap [Return call XXXXXXXX]. Replying to an SMS message in Timescape 1 On the Timescape screen, tap tile. 2 3 4 Tap the tile again. Enter a message text. Tap [Send]. The infinite button in Timescape When you tap a tile, (infinite button) may appear in the upper right corner.
About location services There are two ways to find your location, using Mobile networks with Wi-Fi (Wireless network) or GPS. Wireless network technology determines your position fast but accuracy may vary. If you use GPS technology it may take a little longer, but it will find your exact position. You can enable both Wireless network and GPS to benefit from both technologies when trying to find your position.
･ GPS is operated by the U.S. Department of Defense. The department controls the accuracy of the system, and manages the system. Therefore, GPS radio wave condition may be controlled (degradation of accuracy, suspension of radio wave transmission, etc.) at the discretion of the U.S. Department of Defense. ･ Some wireless communications products (mobile phone, data detectors and some others) block satellite signals and also causes instability of signal reception.
4 5 Read the note and tap [Agree]. Read the note on location information and tap [Agree]. ･ Wireless network users' location information is stored without specifying who they are. Some location information is stored even when the application is not running. Using Google Map The Google Maps application lets you view your current location, find other locations and calculate routes. When you start the Google Maps application, your approximate location is shown using information from nearby mobile towers.
Searching for a location you want to look at 1 On the map screen, press t and tap [Search]. 2 Fill out the search box. 3 4 ･ You can enter addresses, city names, business types and institution names (for example, London and art museum). ･ You can tap the search box to shows a list of all places entered and referred to previously. Tap an address, etc. on the list to check the location on the map. If you tap an address on the menu, you can check the location on the map. Tap [ 実行 (Execute)]/ .
My Maps Wikipedia View My Maps that you create on a PC. Only viewing: You cannot create My Maps on the terminal. 5 If your search type is Transit, tap a route in the list. ･ A route is displayed if you search in car or walk option. Tap to display a route on the map. appears. Tap to display a Wikipedia article related to the location. ❖ Information Receiving guides Google Map helps you receive detailed guides for your destination. 1 On the map screen, press t, then tap [Directions].
Confirming your friend's current location with Google Latitude Google Latitude enables you to check where a friend is on the map, and to share status messages. Latitude also enables you to send messages (SMS) and emails, to make phone calls, and to find the route to where a friend is. Location information cannot be automatically shared. You need to join Latitude and invite a friend who gives his or her location information, or to receive an invitation from him or her.
Setting the calendar view 1 From the Home screen, tap then tap [Calendar]. 2 Press t, tap [Day]/[Week] to select. , ･ In "Day" view, [Week] and [Month] can be selected, and in "Week" view, [Day] and [Month] can be selected. 7 Enter a place and some others of schedule. 8 Tap [Save]. ❖ Information ･ Tap [More] and scroll the screen to set "Time zone", "Guests (Email addresses)", "Show me as", "Privacy".
2 3 Tap a schedule. Tap [Snooze all]/[Dismiss all]. ･ If you have any schedules on hold, they appear on the same screen. ･ If you tap [Snooze all], all the calendars can be put on snooze 5 minutes later. (Snooze is a function that sounds the alarm some time later even though you stop it.) 1 2 From the Home screen, tap . Tap [Clock]. The Clock screen appears. a b c d Changing the calendar settings Set Calendar view, reminder notifications, ringtone, vibration, reminder time.
Turning the alarm ON/OFF Setting the alarm 1 From the Home screen, tap then tap [Alarms]. , 1 ･ The alarm list screen appears. ･ Alternatively, tap on the clock screen to display the alarm clock list. 2 3 On the alarms list screen, tap . ･ If you set the alarm on, green line under lights on and appears in the status bar. ･ When you set the alarm off, the line under turns off. Tap [Add alarm]. ･ A new alarm time setting screen appears. Tap numbers to adjust the time and then tap [Set].
Deleting the alarm 1 On the alarms list screen, tap an alarm to delete. 2 3 Tap [Delete]. The following applications are preinstalled in the terminal to use the various services on the Web. Tap [OK]. Stopping an alarm while the alarm is sounding 1 Other applications On the dialog box for the alarm sounding, tap [Dismiss] or [Snooze]. ･ [Dismiss] stops the alarm. [Snooze] stops the alarm in a given time and sounds again.
SE Store SE Store displays Sony Ericsson Store. You can view information on accessories compatible the terminal and purchase them. To use SE Store, from the Home screen, tap and then tap [SE Store]. PlayNow PlayNow is a web application which allows you to use news flash, dictionary service, etc. To use the application, from the Home screen, tap and then tap [PlayNow] to connect the dedicated site. For membership registration etc., operate following the onscreen instructions.
❖ Information ･ For obtaining, displaying or updating ToruCa, a packet communication charge may be applied. ･ Some ToruCa provided to i-mode terminal may not be obtained/displayed/updated. ･ Depending on the settings of IP (Information Provider), the following functions may not be available.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Service area The terminal works in a 3G roaming area and GSM/GPRS service area. Services are also available in countries and areas supporting 3G850MHz/GSM850MHz. Check available area.
Before using Advance preparation Network service settings Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ Check the subscription of WORLD WING. For details, contact "General Inquiries" on the last page of this manual. ■ Usage charge ･ Overseas usage charges (call and packet communication) differ from those in Japan. ･ Some applications automatically perform communications. Your packet communication charges may be higher even in Japan.
Connectivity Date & time settings When you have set search mode of "Available networks" to "Select automatically" in "Network operators" settings, optimized network is automatically selected. When you connect to the network operator conducted in flat-rate service manually, you can use the service with flat-rate packet communication charges overseas up to the specified upper limit per day. To use this service, subscription of packet flat-rate service is required.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO's network automatically. If connection is failed, perform the following operations. ･ Set "Preferred network mode" of "Network Mode" to "GSM/WCDMA preferred". (P.190) ･ Set "Search mode" to "Select automatically" in "Network operators" settings. (P.
Changing network mode You can change network mode settings according to the network mode (communication method) adopted by the overseas network operator. 1 From the Home screen, press t and tap [Settings]. 2 Tap [Wireless & networks] X [Mobile networks] X [Network Mode]. 3 Select your preferred network mode. ･ You can select from [WCDMA only], [GSM only] or [WCDMA preferred/ GSM]. If you select [WCDMA preferred/GSM], you can use both GSM and WCDMA.
2 Dial + (press and hold [0]) X Country code X Area code (City code) X Enter a phone number. ･ If the area code begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy. ･ To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code. 3 Tap [Call].
■ Having the other party call you ･ To have the other party in Japan call you overseas To have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.
Appendix/Index Optional and related devices A variety of commercially available optional devices allows you to expand the terminal's capabilities by supporting a wide range of purpose, including personal and business uses. Some accessories are only available in some areas. For details, please contact a sales outlet such as docomo Shop. For details on optional devices, see the user's manual of each device.
･ If you execute calls, communications or other function operations while charging, the terminal may become hot and the battery status icon may not indicate charging. In this case, wait until the temperature of the terminal drops and charge again. - The notification LED blinks in red and cannot operate the terminal. ･ When the battery level is low, charge the battery pack. P.29 ■ Terminal operation P.30 ･ The battery pack is a consumable accessory.
The clock is not on time. ･ The clock time may become wrong while turning on the power for a long time. Check if "Auto" time adjust (auto time adjust via network) is set to on and turn the power off and on in a place with strong radio wave conditions. P.120 ･ Due to the crossing of radio waves, at the crowded public places, calls/mails are crossed and the connection status may not be good. Move to other place or call again at other time. - ■ Display ■ Phone call The display is dim.
･ Check if clouds or dirt attach to the lens of camera. - ■ International roaming Cannot use the terminal overseas. ■ When antenna mark is displayed ･ Do you subscribe WIRLD WING? Check if you subscribe WORLD WING. - ■ Out of service area indicator appears ･ Check if you are out of the international roaming service area or in an area with poor signal strength.
When trying to display an image, " × " appears instead of it. Or "× " appears for the demo play or the preview function. ･ " × " may appear instead of destroyed image data. - ■ Bluetooth function The terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found from the terminal. ･ Make Bluetooth communication device (commercial item) registering stand-by state and then register the device on the terminal.
Warranty and After Sales Services Warranty ･ Make sure that the warranty is received with the terminal upon purchase. Check to be sure that "販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.
■ Within the warranty period ･ We repair the terminal free of charge based on the terms documented in the warranty. ･ When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty or that involve malfunction and damage due to incorrect handling by the owner (damage of liquid crystal, connector, etc) will only be repaired at the owner's expense, even if the warranty period is still effective.
■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of six years after the manufacture is discontinued. However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. Note that repair may still be possible depending on the defective portion even if the stock period has expired. Contact "Repairs" on on the last page of this manual (in Japanese only).
● A material that generates a magnetic field is used in the following parts of the terminal. Do not hold an object that is easily affected by magnetism, such as a cash card, close to the terminal. You may not be able to use the card any more. Where it is used: Speaker, earpiece ● If the terminal has gotten wet or moist, immediately power off the terminal and remove the battery pack from it, and then bring it to the DOCOMO-specified repair office as soon as possible.
Press t, then tap [Settings]. 1 From the Home screen, tap then tap [Update center]. 2 Press t, then tap [Refresh]. 2 3 ･ The terminal searches for software updates.Note ❖ Note , ❖ Note ･ To download software updates by using Wi-Fi only, from the Home screen, tap , tap [Update center] X t, then tap [Settings] X [Automatic update] X [Via Wi-Fi only].
3 Follow the onscreen instructions on the PC to install. ･ After installation, PC Companion starts on the PC. If further software update is searched, it is automatically notified. Follow the onscreen instructions on the PC. When PC Companion is installed on your PC 1 Check if PC Companion is activated on the PC. If not, activate PC Companion from the Start menu. 2 Connect the terminal to a PC using a microUSB cable. 3 Follow the onscreen instructions on the PC.
Image pickup device Camera: CMOS sensor In-camera: CMOS sensor Size Camera: 1/4 inches In-camera: 1/13 inch Radio power Camera: Effective pixels: Approx. 5.1 mill. pixels (Recorded pixels: Approx 5.1 mill. pixels) In-camera: Effective pixels: Approx. 300,000 pixels (Recorded pixels: Approx 300,000 pixels) Within Approx.
･ A use of the Internet reduces the actual call (communication)/stand-by time. Composing messages or activating the camera or applications also reduces call (communication)/stand-by time even if you do not call or use the Internet. ･ Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal.
Specific Absorption Rate of Mobile Phone, etc. Mobile Phone GSM/GPRS/EDGE 850/900/ 1800/1900 & UMTS/HSPA Bands 1/5/6/9/19 Specific Absorption Rate (SAR) of Mobile Phones This model SO-03D mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves.
The World Health Organization has stated that "a large number of studies have been performed over the last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse health effects have been established as being caused by mobile phone use." Please refer to the WHO website if you would like more detailed information. http://www.who.int/docstore/peh-emf/ publications/facts_press/fact_english.
guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR).
Internet Association (CTIA) website at http:// www.ctia.org/. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements. ** This paragraph is only applicable to authorities and customers in the United States.
Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone.
■ Recommendations for care and safe use of our products ･ Handle with care and keep in a clean and dust-free place. ･ Warning! May explode if disposed of in fire. ･ Do not expose to liquid or moisture or excess humidity. ･ For optimum performance, the product should not be operated in temperatures below +5°C (+41°F) or above +35°C(+95°F). Do not expose the battery to temperatures above +60°C(+140°F). ･ Do not expose to flames or lit tobacco products. ･ Do not drop, throw or try to bend the product.
■ Power supply (Charger) Connect the charger to power sources as marked on the product. Do not use outdoors or in damp areas. Do not alter or subject the cord to damage or stress. Unplug the unit before cleaning it. Never alter the plug. If it does not fit into the outlet, have a proper outlet installed by an electrician. When a power supply is connected there is a small drain of power. To avoid this small energy waste, disconnect the power supply when the product is fully charged.
■ Personal medical devices Mobile phones may affect implanted medical equipment. Reduce risk of interference by keeping a minimum distance of 22 cm(8.7 inches) between the phone and the device. Use the phone at your right ear. Do not carry the phone in your breast pocket. Turn off the phone if you suspect interference. For all medical devices, consult a physician and the manufacturer.
■ Antenna Use of antenna devices not marketed by Sony Ericsson could damage the phone, reduce performance, and produce SAR levels above the established limits. Do not cover the antenna with your hand as this affects call quality, power levels and can shorten talk and standby times. ■ Radio Frequency (RF) exposure and Specific Absorption Rate (SAR) When the phone or Bluetooth handsfree is turned on, it emits low levels of radio frequency energy.
■ Malware Malware (short for malicious software) is software that can harm the mobile phone or other computers. Malware or harmful applications can include viruses, worms, spyware, and other unwanted programs. While the device does employ security measures to resist such efforts, Sony Ericsson does not warrant or represent that the device will be impervious to the introduction of malware.
■ Memory card If the product comes complete with a removable memory card, it is generally compatible with the handset purchased but may not be compatible with other devices or the capabilities of their memory cards. Check other devices for compatibility before purchase or use. If the product is equipped with a memory card reader, check memory card compatibility before purchase or use. Memory cards are generally formatted prior to shipping. To reformat the memory card, use a compatible device.
･ Recorded data may be damaged or lost when you remove the memory card or memory card adapter, turn off the power while formatting, reading or writing data, or use the memory card in locations subject to static electricity or high electrical field emissions. ■ Protection of personal information Erase personal data before disposing of the product. To delete data, perform a master reset. Deleting data from the phone memory does not ensure that it cannot be recovered.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ･ Reorient or relocate the receiving antenna. ･ Increase the separation between the equipment and receiver. ･ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
We fulfill the requirements of the R&TTE Directive (1999/5/EC) End User Licence Agreement End User Licence Agreement Software delivered with this device and its media is owned by Sony Ericsson Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors. Sony Ericsson grants you a non-exclusive limited licence to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
About Open Source Software About Open Source Software This product includes certain open source or other software originating from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers and notices. The exact terms of GPL, LGPL and some other licenses, disclaimers and notices are reproduced in the about box in this product and are also available at http:// opensource.sonyericsson.
Note that some performances, shows, and exhibitions may not allow photography, movie shooting, or sound recording even for personal use. You should also refrain from taking a picture of other people and disclosing it by such means as posting it on a site on the Internet without their consent because of possible infringement of their right of portrait. Trademarks The company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders.
･ "Google", "Google Maps", YouTube" and "YouTube" logo are trademarks or registered trademarks of Google, Inc. ･ "Facebook" is a trademark or registered trademark of Facebook, Inc. ･ "Ericsson" is a trademark or registered trademark of Telefonaktiebolaget LM Ericsson. ･ mixi and mixi logo are registered trademarks of mixi, Inc. ･ DLNA is a trademark or registered trademark of the Digital Living Network Alliance.
･ Java, JavaScript and Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. ･ End-user license agreement for Sun Java Platform, Micro Edition. 1. Restrictions: Software is confidential copyrighted information of Sun and title to all copies is retained by Sun and/or its licensors. Customer shall not modify, decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software.
Index A B About phone .................................................. 121 Access point Initialize ........................................................ 94 Settings ........................................................ 93 Accessibility ................................................... 120 Account settings Facebook ................................................... 115 Google ....................................................... 114 Accounts & sync ............................................
C Calculator......................................................... 50 Calendar ........................................................ 179 Create a schedule...................................... 180 Display a schedule .................................... 180 Call ................................................................... 71 Decline ................................................... 73, 74 End............................................................... 72 Make ...............................
Forward ...................................................... 127 Receive ...................................................... 126 Reply .......................................................... 127 Save attachment file................................... 127 Send........................................................... 125 Setup.......................................................... 124 Email account Add ............................................................ 129 Change .......................
M N Map Application............................................... 53 McDonald’s ...................................................... 53 Media Go ....................................................... 142 Install.......................................................... 142 Playlist ........................................................ 167 Transfer data .............................................. 143 melodycall........................................................ 49 Message (SMS)..............
Remaining battery level ........................... 30, 121 Reset .............................................................. 117 Ringtone settings ........................................... 104 Ringtone volume ...................................... 74, 104 S Schedule Create ........................................................ 180 Display ....................................................... 180 Screen brightness .......................................... 105 Screen lock .........................
V Vibrate.................................... 103, 124, 181, 182 Video Unlimited .............................................. 185 VirusScan (docomo Anshin Scan) ................... 54 Voice input & output....................................... 119 Voice Mail Service............................................ 86 Volume adjust................................................. 104 VPN ................................................................ 101 W Wallpaper ...........................................
Make various applications or charge your billing plan, check your charges and points, and more online. My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures) *In Japanese only. * "docomo ID and password" are required for use. * Please contact "General Inquiries" described on the last page of this manual if you forget or do not have "docomo ID and password". * May not be available in some cases depending on the conditions of your subscription.
General Inquiries 0120-005-250 (toll free) *Service available in: English, Portuguese, Chinese, Spanish, Korean. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) *Unavailable from land-line phones, etc. ■ From land-line phones (In Japanese only) Repairs ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Unavailable from land-line phones, etc.
Sony Ericsson Consumer Web site At www.sonyericsson.com/support there is a support section where help and tips are only a few clicks away. Here you will find the latest computer software updates and tips on how to use your product more efficiently. Service and support Important information You have access to a portfolio of exclusive service advantages such as: • Global and local Web sites providing support. • A global network of Contact Centers. • An extensive network of Sony Ericsson service partners.
Conditions 1. This Limited Warranty is valid only if the original proof of purchase for this Product issued by a Sony Ericsson authorised dealer specifying the date of purchase and serial number**, is presented with the Product to be repaired or replaced. Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer. 2.
