User's Manual Part 2

74
Calling/Network Services
SO-02C Web_TA
Playing the voice message
1
When the SMS notification "NTT
DoCoMo VM:XX" appears, tap
[New message] from the
notification panel (P.34).
･ A recorded message plays.
2
Follow the voice prompts to
operate.
When there is another incoming call while you
are on a call, the in-call ring tone notifies you
of the second call. You can answer the
second call by putting the first call on hold.
You can also put your current call on hold and
place a call to another party.
❖Information
･ Even when the call is on hold, the caller is charged
for a call fee.
Setting Call Waiting
1
From the Home screen, press t
and tap [Settings].
2
Tap [Call settings] X [Network
service setting].
3
Tap [Call Waiting].
You can select the following operations.
Putting the current call on hold and
answering an incoming call
1
When you hear the beep during a
call, tap [Answer].
The first call is put automatically on hold
and the incoming call is received.
･ The FOMA terminal does not support
Conference call. When you tap to
the upper right of the screen, "Unable
to conference calls" appears.
･ Tap [Busy] to connect the incoming
call to the Voice Mail service center.
Activating Voice Mail service is
required beforehand.
Call Waiting
Activate Call
Waiting
Tap [OK] to activate the Call
Waiting Service.
Deactivate Call
Waiting
Tap [OK] to deactivate the Call
Waiting Service.
Check settings You can check the current
service settings.
Continued on next page
SO-02C_E_TA.book 74 ページ ２０１１年５月２４日 火曜日 午後２時３３分