User's Manual Part 2

83
Settings
SO-02C Web_TA
❖Information
･ The next time you connect to a Wi-Fi network, the
security key is saved in the FOMA terminal.
■ Wi-Fi network status icons on status
bar
The following icons appear according to
the Wi-Fi network connection status.
* Without connected to Wi-Fi network, you need to set Wi-
Fi Network notification to ON beforehand. (P.83)
When you are connected to a Wi-Fi network
or when there are Wi-Fi networks available in
your vicinity, you can see the status of these
Wi-Fi networks. You can also enable the
FOMA terminal to notify you wherever a Wi-Fi
network is detected.
Setting the Wi-Fi network
notification to ON
1
Confirm that Wi-Fi is turned on,
and then on the Settings screen
(P.79), tap [Wireless & networks] X
[Wi-Fi settings].
2
Mark [Network notification]
checkbox.
Scanning for Wi-Fi networks
manually
1
From the Settings screen (P.79),
tap [Wireless & networks] X [Wi-Fi
settings].
2
Press t.
3
Tap [Scan].
･ Scanning for Wi-Fi networks is started,
and they are displayed under "Wi-Fi
networks".
4
Tap a Wi-Fi network in the list to
connect to it.
Appears when connected to Wi-Fi network.
Appears when connected to Wi-Fi network
using AutoIP function.
Appears when any open network within the
service area is detected*.
Wi-Fi network status
SO-02C_E_TA.book 83 ページ ２０１１年５月２４日 火曜日 午後２時３３分