User's Manual Part 2

182
Appendix/Index
SO-02C Web_TA
■ Phone call
■ Display
■ Sound
■ Display data
■ Camera
The clock is not on time.
The clock time may become wrong
while turning on the power for a long
time. Check if Auto time adjust via
network is set to on and turn the power
off and on in a place with strong radio
wave conditions.
P. 1 03
Cannot make a call even if you press the dial
button.
Check if you activate the SIM card
lock.
P. 9 2
Check if you activate Airplane mode.
P. 8 1
The ringtone does not sound.
Is the call alert volume of volume
setting set to silent?
P. 8 8
Check if the Silent mode is active.
P. 8 7
Is the ring time for Voice Mail service or
Call Forwarding Service "0 Sec."?
P. 7 3
P. 7 7
Calls are not connected.
(Even when moving " 圏外 (out of service area)"
does not disappear, or although radio waves are
enough, making/receiving calls is unavailable).
Turn the power off and on, or remove
and attach battery pack or UIM.
P. 2 4
P. 2 7
P. 3 0
Due to the nature of radio waves,
making/receiving calls may be
unavailable even when "not out of
service area" or " appears on the
display for the radio wave condition".
Move to the other place and call again.
-
Due to the crossing of radio waves, at
the crowded public places, calls/mails
are crossed and the connection status
may not be good. Move to other place
or call again at other time.
-
The display is dim.
Check if the backlight time-out is set. P.90
Check if the brightness of screen is
changed.
P. 8 9
During a voice call, the distant party's voice is
hard to listen to or too loud.
Check if the listening volume of the
sound volume setting is changed.
P. 5 9
Images or ringtones set in each feature do not
work and the terminal operates in the default
data.
Is the UIM currently inserted is the
same one which is set when the
images or ringtones are obtained?
-
Photos and video taken with the camera are
blurred.
When shooting an object nearby,
switch to macro shooting.
P. 1 27
Continued on next page
SO-02C_E_TA.book 182 ージ 201年月2日 曜日 午後時3