User's Manual Part 1

17
Contents/Precautions
SO-02C Web_TA
7. Material list
■ Common precautions
･ Do not expose to water.
The FOMA terminal, battery pack, AC Adapter
cable, and UIM are not waterproof. Do not use
them in a humid place such as bathroom or in
the rain. If you carry the FOMA terminal on your
body, perspiration may corrode the internal
parts of the FOMA terminal and cause
malfunction. Note that if a trouble is diagnosed
as exposure to water or other liquid, repairs of
the FOMA terminal may not be covered by the
Warranty or it may not be possible to repair
such phones. In that case, even if the FOMA
terminal can be repaired, it is repaired at the
owner's expense.
･ Clean the FOMA terminal with a dry soft
cloth (such as used for cleaning
eyeglasses).
- Do not rub it roughly with a dry cloth. The
display may be damaged.
- Drops of water or dirt left on the display may
cause stains.
- Do not use alcohol, thinner, benzene,
cleaning detergent, etc. to clean the FOMA
terminal. These chemicals may erase the
printing on the FOMA terminal or cause
discoloration.
Part Material
Surface
treatment
Exterior case
(Front)
PC resin
(with glass)
UV coating
Proximity sensor PC resin None
Light sensor PC resin None
Notification LED PC resin None
Exterior case
(Back, HDMI
connector
cover)
PC resin
(with glass)
Non-conductive
vacuum
metallization
(tin)+UV coating
Hardware key
(Back key, Home
key, Menu key,
Camera key,
Volume key,
Power key)
PC resin Non-conductive
vacuum
metallization
(tin)+UV coating
Transparent
plate (Display)
Hardened
glass
Shatterproof film
(PET)
Transparent
plate
(Camera lens)
PMMA Hard coating
Flash/Photo light PC resin None
Back cover PC resin Non-conductive
vacuum
metallization
(tin)+UV coating
Handling precautions
Continued on next page
SO-02C_E_TA.book 17 ページ ２０１１年５月２４日 火曜日 午後２時３３分