User's Manual

5
Select Save.
To select an MMS profile
1
Select Menu > Settings > Connectivity >
Message settings > Picture message.
2
Select an existing profile or create a
new one.
To set the message server address
1
Select Menu > Settings > Connectivity >
Message settings > Picture message.
2
Scroll to a profile and select Options >
Edit.
3
Scroll to Message server and select
Edit.
4
Enter the address and select OK >
Save.
The phone does not ring or rings too
softly
Make sure that Silent mode has not
been set to On. See To turn off the
ringtone on page 51.
Check the ringtone volume. See To set
the ringtone volume on page 51.
Check the profile. See To select a
profile on page 50.
Check the forward call options. See
To
forward calls
on page 22.
The phone cannot be detected by
other devices using Bluetooth
wireless technology
You have not turned the Bluetooth
function on. Make sure that the visibility
is set to Show phone. See To turn on
the Bluetooth function on page 37.
I cannot synchronise or transfer
content between my phone and my
computer, when using a USB cable.
The cable or software has not been
properly installed. Go to
www.sonyericsson.com/support to
read Feature guides which contain
detailed installation instructions and
troubleshooting sections.
I have forgotten my code memo
passcode
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter the
code memo, you must proceed as if
you are opening it for the first time.
To reset Code memo
1
Select Menu > Organiser > Code
memo.
2
Enter an incorrect passcode three
times.
56 Troubleshooting