User's Guide Part 2
294
Convenient Functions
z Displayed call times and charges may differ from
the actual figures. Consumption tax is not included
in the call charges.
z If you have subscribed to the 2in1, the total amount
of Number A/B appears as the Total calls duration
and Total calls cost.
1
i“SETTINGS”“Call time/Charge”
“Call data”
Resetting the total call time and total
call charges
<Reset total>
You can reset the Total calls duration or Total calls
charge displayed in the “Call data” to zero.
1
i“SETTINGS”“Call time/Charge”
“Reset total”Enter your security
codeSelect any item:
Reset total duration……Resets the accumulated
duration.
Reset total cost……Enters PIN2 code and resets
the accumulated charge.
PIN2 code→p.100
Resetting charges automatically
<Auto reset total cost>
You can set the FOMA terminal to reset the Total calls
cost displayed in “Call data” to zero automatically on
the 1st day every month, at 0:00.
1
i“SETTINGS”“Call time/Charge”
“Auto reset total cost”Enter your
security code
2
“Auto reset”“ON”Enter PIN2 code
PIN2 code→ p.100
■ Not to set Auto reset
“OFF”
Setting the Upper Limit of
Charge to Notify the Alarm
<Notice designate calls>
When accumulated charge displayed at “Call data”
exceeds the cost limit set in this function, you are
notified on the standby screen or with alarms.
z The alarm notification works only once when the
accumulated charge exceeds the set cost limit.
z Exceeding the limit does not prevent you from
making a call.
1
i“SETTINGS”“Call time/Charge”
“Notice designate calls”Enter your
security code
2
Select any item:
Cost limit setting……Sets the cost limit between
10 and 100,000 by 10 units.
Notify setting
Notify cost limit……Specifies whether to
notify the cost limit.
Alarm tone……Selects an alarm tone.
Vol u m e……Sets the alarm tone volume
with c.
N
z If the last or total voice or digital calls duration exceeds
“199h59m59s”, the call count returns to “0s”.
z The time and charge of i-mode or packet
communication, and the charge of sending Chaku-
moji are not counted. To check i-mode communication
charges, see the “Mobile Phone User’s Guide [i-mode]
FOMA version”.
z The time taken to pick up a call, or for the other party
to pick up a call, and the time for switching a voice call
and a videophone call are not counted.
z When the FOMA terminal is turned off, the duration
and charge for the last call reverts to “0s” and “
￥
∗∗
”
respectively.
z Turning the FOMA terminal off does not affect the total
duration and charge.
z The international call charge for WORLD CALL is
counted. For other international call services, the
charge is not counted.
N
z Setting Auto reset total cost to “ON” and changing the
month in “Set main time” resets the Total calls cost.
z The Auto reset total cost is reset to “OFF” when:
• The FOMA terminal is turned on without the FOMA
card (UIM) inserted
• t is pressed on the PIN2 code input screen
which appears when the FOMA terminal is turned
on
• The PIN2 code is locked→p.100
• An error occurs on the FOMA card (UIM)