User's Guide Part 2

370
Appendix/External Devices/Troubleshooting
“Failed to retrieve channel information”
● This message appears when you display the channel
list screen for the first time after purchase or when you
attempt to display the channel list screen after resetting
the i-Channel, changing the i-Channel host URL,
initializing the FOMA terminal or exchanging the FOMA
card (UIM), and then if i-Channel information cannot be
obtained. Move to a location where “ ” is displayed,
then display the channel list screen again.→p.153
“Format microSD for your phone”
● There is an error such as a microSD card that has not
been initialized. Reformat the microSD card.→ p.251
“Frame number of this page is not supported”
● The webpage cannot be displayed because the frame
count exceeds the maximum that can be displayed on
Full Browser or pixel browser.
“Function cannot operate any more”
● Close another function before continuing the operation.
“i-αppli stand-by display terminated due to
security error”
“Software terminated due to security error”
● This message appears when an i-αppli or i-αppli
standby screen (including i-αppli DX) was closed
because you attempted to perform an unauthorized
operation.→ pp.189, 199
““i-αppli To” function is not set”
● This message appears when you attempted to start
software from a site, mail, Send Ir data, Bar code
reader, IC card, ToruCa or data broadcast, but the
software could not start because the specified software
has no association permission.→ p.197
“Input error (205)”
● This message appears after you input and send data
from a site of Internet homepage. Press d to cancel
the input text or settings (The set or input content has
been sent, so this operation does not cancel the
transmission).
“Insert microSD”
● The microSD card is not inserted correctly, or may be
broken. Check that the microSD card is correctly
inserted into the FOMA terminal.→p.244
“Insert UIM”
● This message appears when the UIM is not inserted
correctly, or could be broken. Check that the FOMA
card is inserted correctly.→p.39
“Invalid address”
● The address contains a “,” and is invalid. Delete “,”.
● Mail cannot be replied to because the address of the
received mail exceeds 50 single-byte characters.
● SMS cannot be sent because the address includes
characters other than numerals, “#” and “*”. Delete
characters and spaces other than numerals, “#” and
“*”.
“Invalid UIM Auto-start failed”
● This message appears when an i-αppli that is restricted
by FOMA card security attempted to start
automatically. → p.39
“Invalid UIM Requested service not available”
● This message appears when you select and attempt to
run a shortcut icon for data that is protected by FOMA
card security.→p.39
● This message appears when you select and attempt to
run a screen memo or MessageR/F that is protected by
FOMA card security.→p.39
“Invalid UIM Requested software failed to start”
● This message appears when you specify and attempt
to start an i-αppli that is restricted by FOMA card
security.→p.39
“Invalid URL”
● This message appears when you entered a URL using
“Enter URL” or “Home URL”, but it began with
something other than “http://” or “https://”, or you
selected OK without any input. Enter the URL again.
→pp.141, 148, 218
“Is the ToruCa automatic reading function in a
mobile phone used through the reader/writer?”
● This message appears when you swiped the FeliCa
mark over a reader with “Auto reading setting” set to
“OFF”. Select “YES” to use the automatic reading
function.→p.206
“Memory full Cannot move”
● This message appears when you try to move data out
of a secret folder but the destination folder is full. Delete
data from the destination folder, then move the data
again.→p.104
“Memory No.:XXX Cannot overwrite”
● This message appears when you are not in Secret
mode or Secret data only mode, but you try to register
the same phone number as a secret data memory
number in the phonebook. →p.103
“Memory shortage”
● This message appears when the software cannot be
launched due to memory shortage.
● Operation is interrupted due to memory shortage. If
this message often appears, reboot handset.
“Memory shortage Quit”
● The process is interrupted due to memory shortage.
When you are composing an i-mode mail, the number
of tasks running and the combination of characters may
make it impossible to input as many as 5,000 double-
byte characters.
“Memory shortage Return to Full Browser menu”
● The process was interrupted due to memory shortage.
Press d to return to the Full Browser menu.
“Memory shortage Return to i-mode menu”
● The process is interrupted due to memory shortage.
Press d to return to the i-mode menu.