User's Guide Part 2

360
Appendix/External Devices/Troubleshooting
Multi Access Combination Patterns
○: Can be activated. ×: Cannot be activated. △: Can be activated depending on situation.
−: Functionally incompatible.
*1: Includes i-Channel site view and communication via Full Browser or ToruCa.
*2: If you have subscribed to “Call Waiting”, you can hold the current voice call to make another call.
*3: If you have subscribed to “Call Waiting”, you can hold the current voice call to answer an incoming call. If you have
subscribed to “Voice Mail” or “Call Forwarding”, you can end the current communication and then answer a new
incoming communication.→p.317
*4: If you have subscribed to “Call Waiting”, “Voice Mail” or “Call Forwarding”, you can end the current communication
and then answer a new incoming communication.→p.317
*5: Make a videophone call after disconnecting the current i-mode.
*6: If “V-phone while packet” is set to “V-phone priority”, answering an incoming videophone call disconnects i-mode
communication.
*7: You cannot communicate via i-αppli software.
*8: An i-mode mail, MessageR or MessageF is not received, but is stored in the i-mode Center. You can receive a stored
i-mode message, MessageR or MessageF by performing “Check new messages” after the current communication
ends.
*9: It is logged as a missed call.
Another
communication
Current condition
Voice call Videophone
Using
i-mode
*1
Using
i-αppli
i-mode mail
Dialing
Incoming
call
Dialing
Incoming
call
Send Receive
During a voice call
△
*2
△
*3
×△
*4
○×○○
During a videophone
call
×△
*4
−△
*4
××××
*8
During i-mode
*1
○○△
*5
△
*6
−○○○
During packet
communication with
a PC
○○×××△
*7
××
*8
During 64K data
communication
×△
*4
×△
*4
××××
*8
Another
communication
Current condition
SMS
Packet
communication
64K data
communication
Send Receive Send Receive Send Receive
During a voice call
○○○○×△
*4
During a videophone
call
×○××
*9
×△
*4
During i-mode
*1
○○××××
During packet
communication with
a PC
○○−−××
During 64K data
communication
○○×××△
*4