User's Guide Part 1

67
Continued on next page
Voice/Videophone Calls
Setting Functions for the
Videophone
1
i“SETTINGS”“Videophone”
The “Videophone settings”
screen appears.
2
Select any item:
Visual preference……Selects the image quality of
videophone calls from “Normal/Prefer img qual/
Prefer motion spd”.
Select image→ p.67
Auto redial as voice……Sets whether to switch to a
voice call when a videophone call cannot be made
(ON/OFF).
Display setting
Main display……Selects the image displayed
on the main display from “Other side/My side”.
Ntfy switch-mode→ p.67
Hands-free switch……Sets whether to switch to
Handsfree automatically when starting a videophone
call (ON/OFF).
V-phone while packet→ p.67
Setting an image to send <Select image>
z You can set a JPEG image whose file size is 100K
bytes or less and not larger than 854 dots wide ×
854 dots high, or a GIF image whose file size is
100K bytes or less and not larger than 854 dots
wide × 480 dots high or 480 dots wide × 854 dots
high (except for the files with restrictions).
1
Videophone settings screen (p.67) 
“Select image”Select any item:
On hold……Sets the image sent for a call on
answer hold.
Holding……Sets the image sent while holding a call.
Substitute image……Sets the image.
Record message……You can set the image sent
while recording videophone messages.
Preparing……You can set the image sent while
preparing for recording videophone messages.
Voice memo……Sets the image sent while
recording the voice memo.
2
Select the image to be sent:
Pre-installed……Sends only a message.
Original……Sends an image and a message.
To change the image, select an image from My
picture from “Change setting” of the function menu.
Chara-den
*
……Sends the image selected in
“Substitute image”.
Function menu of Chara-den list screen → p.238
Priority order for Chara-den setting→p.71
To change the Chara-den, select a Chara-den from
Chara-den list from “Change setting” of the function
menu.
* : Available only when “Substitute image” is selected.
Setting for Switching between Voice
Call and Videophone Call
<Ntfy switch-mode>
You can set whether to notify the other party that your
FOMA terminal supports the switch between a voice
call and a videophone call.
z The other party cannot switch the call when set to
“Indication OFF”.
z You cannot set this function during a call or while
“ ” appears.
1
Videophone settings screen (p.67) 
“Ntfy switch-mode”Select any item:
Indication ON・Indication OFF……Activates or
deactivates the Ntfy switch-mode.
Check Indication……Displays the “Ntfy switch-
mode” setting.
Setting the answer mode when you
receive a videophone call during
i-mode
<V-phone while packet>
z As the multi access function cannot be used for
videophone, incoming videophone calls during
i-mode communication or while sending or receiving
mails are handled according to this setting.→p.360
1
Videophone settings screen (p.67)“V-
phone while packet”Select any item:
V-phone priority……Switches to the videophone
ringing screen. When you answer the incoming
videophone, i-mode communication is disconnected.
Packet downld priority……Rejects the incoming
videophone call.
Videophone settings