User's Guide Part 1

28
Before Using the Handset
* : For details on the icons, refer to the “Manual for PC
Connection” (PDF format) in the provided CD-ROM.
5 / / / Unread message R and F (in red
when each of them is full) p.179
6 /
(Red)
Mail kept at the i-mode Center/Full
p.164
“Receive option setting” is set to
“ON” and a mail is kept at the
i-mode Centerp.164
/
(Red)
MessageR kept at the i-mode
Center/Fullp.179
/
(Red)
MessageF kept at the i-mode
Center/Fullp.179
7
Dial lockp.101
Secret mode/Secret data only
mode p.103
/
Original lock/Original lock released
temporarilypp.106, 107
/
Secret mode or Secret data only
mode and Original lock is set or
released temporarilypp.103, 106
8 IC card lockp.206
9 / microSD mode/MTP mode setp.251
//
USB cable connected and
Communication mode/microSD
mode/MTP mode setp.251
//
Handsfree compatible device
connected and Communication
mode/microSD mode/MTP mode
setpp.59, 251
//
USB cable/Handsfree compatible
device connected and
Communication mode/microSD
mode/MTP mode setpp.59, 251
0 Infrared data exchange in progress
p.257
Infrared remote control operated
p.261
IC card authentication in progress
p.111
iC communication in progress
(sending/receiving data) p.259
! microSD card inserted p.244
microSD card (invalid) inserted
p.244
Icon Description
! microSD reader/writer operated
p.252
microSD being accessed p.247
@ During a voice call p.48
64K data communication in progress
*
During a videophone callp.48
Switching between voice call and
videophone callpp.50, 60
# Battery level p.44
$ Vibratorp.84
%
Ring volume set to “Silent”p.61
Mail/Msg. ring time is set to “OFF”
p.85
^ Manner mode p.86
& Public mode (Driving mode)p.62
* Music&Video Channel program
reservation set p.269
( Alarm notification functionp.289
) 1seg timer recordingp.214
q to Voice mail messagep.312
w to Record messagep.65
e to Record VP messagep.65
r Display light set to “OFF” p.90
Shied view set to “ON” p.90
Shield veiw set to “ON”, backlight
set to “OFF” p.90
t Keypad being locked/standby
(Timer set)p.110
y Side key guard set to “ON”p.112
N
z The display adopts state-of-the-art technology; some
dots (points) may not light up while others may
constantly light up due to its characteristics. Note that
this phenomenon is not a failure.
z You can check the name of the displayed icons by
selecting “SETTINGS”“Display”“Icons
description”.
Icon Description