User's Guide Part 1

214
1seg
Using Timer Activation/
Recording
<Booking program list/Timer recording list>
Set date and time, channel, program title, etc. Alarm
sounds at specified date and time indicating the
program/recording start.
z Timer activation/recording alarms→p.289
z Up to 100 activation/recording entries can be
booked.
z Program guide i-αppli, channel link displayed on a
site or mail message, etc. are also available for
timer activation/recording.
<Example: To book activation>
1
i“1SEG”“Booking program list”
The “Booking program list”
screen appears.
■ To book timer
recording
“Timer recording list”
The “Timer recording list”
screen appears.
2
u (FUNC)“New”
■ To edit booked schedule
u (FUNC)“Edit”
Software key o displays “New” if no entry is
stored and “Edit” if any.
3
Select any item
Date setting (Start/End)
*1
……Enter date and
time to start/end.
Enter date……Enter date and time.
Choose date……Select date from Calendar,
then enter time.
Channel……Select channel.
Edit title……Enter program title.
Repeat……Select “1 time”, “Daily” or “Select
day”.
Alarm
*2
……Set whether to play the alarm at
specified date and time of time recording.
Alarm
*3
……Select “ON”, “ON/Set time” (“15
seconds before” to “10 seconds before”) or “OFF” for
alarm at timer activation date and time.
Alarm tone……Select the alarm tone from
Clock Alarm Tone or melody, i-motion or music
folders at timer activation date and time.
Vol ume……Use c to adjust the alarm tone
volume.
Priority
*2
……Set operation to be performed
when the start date and time arrives while using
1seg/Music group (1seg, Data Box (1seg), Music,
Music&Video Channel).
Recording……Interrupt/End current operation
to start recording.
Operation preferred……A screen appears
asking whether to start recording. Select “YES”
to interrupt/end current operation to start
recording.
Activate TV w/ alarm……Set whether to
activate 1seg from the alarm notification screen.
If “ON” is selected, press d (TV) then select “YES”
to activate 1seg in alarm notification.
*1 : For booking program, set “Date setting(from)”.
*2 : Set only for timer recording.
*3 : Set only for booking program.
4
Set each itemo (Finish)
<Video recording>
z If signal strength becomes , recording continues
but video/audio are not saved.
z “ ” flashes during recording.
z Recording is not interrupted even if screens are
changed by Multitask or a call arrives.
z During recording, alarm sounds for about 2 seconds,
one minute before recording scheduled time.
Operation is performed based on “Priority” set at the
time of timer recording registration as follows:
• “Recording”: Confirmation message appears, video
recording is finished and timer recording starts.
• “Operation preferred”: Message appears asking
whether to start timer recording. Select “YES” to
end video recording and start timer recording.
Select “NO” to continue video recording.
z Some data cannot be recorded until the memory is
full.
z 1seg contains copy control signals: “Copy Never”,
“Copy Once”, “Copy Free”. Each broadcast station
sets copy control signals.
z “Copy Never” program cannot be recorded. When
copy control signal changes to “Copy Never” during
recording, recording stops and video recorded until
then will be saved.
N
Booking program list
Function menu  p.215