User's Guide Part 1

187
i-αppli
Launching an i- α ppli
Launching an i- α ppli
1
o (1 second or longer)
The “Software list” screen
appears at the bottom of the
screen.
■ To search i-αppli by
i-mode
“Search by i-mode”
“YES”
2
Select software
When you launch the software, “ ” or “ ”
appears at the bottom of the screen.
Pre-installed software→p.190
Quitting an i- α ppli
1
t (1 second or longer) or y
“YES”
● Motion tracking
The FOMA terminal supports “motion tracking” that
operates i-αppli using camera recognition technology
(by waving or shaking the FOMA terminal).
z The function may not be available in the following
cases:
• The camera lens is dirty
• Clothes and background colors are similar
• Background changes quickly, e.g. when in transit
• The location is dark or too bright
N
z If you receive a voice or videophone call while i-αppli
is active, the software is paused. The software screen
reappears when the call ends. However, the setting of
“V-phone while packet” applies to videophone during
i-αppli communication.
z The i-αppli mail used with mail-linked i-αppli may not
be displayed correctly.
z You can save the data you use (i-αppli data (microSD))
to the microSD card depending on the software.
z Some i-αppli allows you to use the Phone To/AV
Phone To or Web To function from the i-αppli.
However, you cannot use these functions from the
i-αppli standby screen. (You can use these functions
when an i-αppli is activated.)
z Images used in i-αppli
*
and data you enter may be
automatically sent to the server via the Internet.
* : Images used in i-αppli refers to images shot by the
camera activated by a camera-linked i-αppli, images
retrieved using an i-αppli Infrared data exchange or
iC communication function, images downloaded by
an i-αppli from an i-mode site or website or images
loaded by an i-αppli from Data box.
Software list
Function menu  p.188
z If the memory used to store trace information is full,
the oldest entry is overwritten.
z Some i-αppli software may not make sounds.
z If the camera is activated from an i-αppli, the shot
images are saved and used as part of the i-αppli.
z You can use an i-αppli to activate the Bar code reader
and read JAN codes and QR codes. The read data are
used by the software.
z With some software applications, the IP (information
service provider) may access software stored on your
FOMA terminal and directly disable the use of the
software. In this case, you can no longer launch,
upgrade or set the software as the standby screen. You
can only delete the software or view the software
information. To use the software again, you have to
contact the IP and have them send an instruction to re-
enable the software.
z With some software applications, the IP (information
service provider) may send data to software stored on
your FOMA terminal.
z When an IP (information service provider) sends a
disable or re-enable instruction or other data to
software stored on your FOMA terminal, the “ ” icon
flashes. No communication charges are applied in this
case.
z When 2in1 is set to B mode or Dual mode, you may
not be able to launch, operate or set an i-αppli
depending on the i-αppli.
z You cannot launch an i-αppli:
• While an image is edited
• While an i-motion or Chaku-Uta Full
®
is downloaded
z Some software is displayed on fullscreen, and the
remaining battery icon or the signal strength icon may
not be displayed.
■ Warning
z Motion tracking i-αppli is a game that you play by
tilting or shaking the FOMA terminal. Shaking the
terminal may hit a person, thing, etc. and result in an
accident or damage. When playing the game, firmly
grip the FOMA terminal, do not shake it too much,
and confirm safety around.
N