User's Guide Part 1

154
i-mode/i-motion/i-Channel
Channel list screen (p.153)
Add shortcut → p.94
Replay……Displays the channel list screen from the
beginning.
Sound effect……Sets whether to play the sound effect of
the channel list screen or not (ON/OFF).
Window
Open new window……“Using multi window”
→p.140
Close window……Closes the displayed i-Channel
window.
Change window……Switches windows when
multiple websites are open.
Setting i-Channel
<i-Channel setting>
You can set whether i-Channel information is
displayed on the standby screen as a ticker or not.
You can also set the scroll speed, color/front size of
the ticker on the standby screen.
z When set to “ON”, ticker always appears on the
standby screen. When set to “Receiving”, ticker
appears twice on the standby screen when news is
received.
1
o  “i-Channel”  Select any item:
i-Channel list……Displays the channel list.
i-Channel setting
Ticker display setting (default: ON)……Sets
whether the ticker of channel information is
displayed on the standby screen (ON/
Receiving/OFF).
Ticker speed setting (default: Normal)……
Selects the scrolling speed of the ticker from
“Normal/High/Low”.
Ticker color setting
*
……Selects the ticker
color (“White”/“Yellow”/“Blue”/“Red”/“Green”).
* : Move the highlight to display the ticker color.
Ticker size setting (default: Standard)……
Selects the ticker font size from “Small/
Standard/Large”.→p.93
Reset i-Channel……Resets the i-Channel settings
to the default settings.
z When information is received, the ring tone will not
sound, and the vibrator does not vibrate. Also, the
illumination does not flash.
N
z The setting of “Sound effect” set on the channel list
screen is applied to “Sound effect” of “i-mode
settings”.
N
N
z The i-Channel setting cannot be changed in Public
mode (Driving mode), at the time of purchase (Reset
i-Channel) or if the FOMA card (UIM) is not inserted,
etc.
<Ticker display setting>
z The ticker display setting remains when you
unsubscribe from i-Channel or when you unsubscribe
from i-mode service before unsubscribing from
i-Channel, but tickers will not be displayed
automatically.
z Settings are retained for each mode of 2in1.
<Reset i-Channel>
z i-Channel tickers are not displayed just after resetting
i-Channel. The ticker is turned on again automatically
when the information is updated automatically or
when p is pressed to receive the latest information.