User's Guide Part 2
289
Data Display/Edit/Management
6
Press (Save), select [Overwrite], and
press
.
The image with the stamp is saved by overwriting
the original image.
To save as a new image
Select [Save new]
→
a place to save to.
Pasting Text
Text can be pasted to an image of [sQCIF(128
×
96)], [QCIF(176
×
144)], [QVGA(240
×
320)], [CIF(352
×
288)], [VGA(640
×
480)], and
[Stby(480
×
864)]. The style and color of the
text can also be specified.
Example: Pasting text and saving by overwriting
1
From My picture file list, select an image,
press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Text stamp] and
press
.
Ｔｅｘｔ ｓｔａｍｐ
Ｉｎｐｕｔ ｔｅｘｔ
Ｆｏｎｔ ｃｏｌｏｒ
□
Ｆｏｎｔ ｓｉｚｅ
Ｓｔｄ
Ｆｏｎｔ ｔｙｐｅ
Ｓｔｄ
Ｔｈｉｃｋｎｅｓｓ
Ｓｔｄ
Ｕｎｄｅｒｌｉｎｅ
Ｎｏ
[Input text]:
Enter a text to be pasted within 10 full-width or
20 half-width characters.
[Font color]:
Select the color of a font to be pasted.
[Font size]:
Select the size of a font to be pasted.
[Font type]:
Select the type of a font to be pasted.
[Thickness]:
Select the thickness of a font to be pasted.
[Underline]:
Select whether to display a line under a font to
be pasted.
3
Set each item.
4
Press (OK).
5
Use / to adjust the position
and press
(Paste).
To add the same text stamp
Repeat step 5.
To paste another text stamp
Press (Retry) and perform step 2 to 5 again.
6
Press (OK).
7
Press (Save), select [Overwrite], and
press
.
The image with the text is saved by overwriting the
original image.
To save as a new image
Select [Save new]
→
a place to save to.
Trimming Part of an Image After
Zoom In
You can specify a part of an image after
zooming in on it and trim it into a size of
[sQCIF(128
×
96)], [QCIF(176
×
144)],
[QVGA(240
×
320)], [CIF(352
×
288)],
[VGA(640
×
480)], and [Stand-by(480
×
864)].
ˎ
When the image size is [sQCIF(128
×
96)], you
cannot trim this image.
Example: Trimming an image and saving by overwriting
1
From My picture file list, select an image,
press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Zoom&trim]
→
a
size of an image to be trimmed and press
.
ˎ
The image size displayed in gray is not available
for trimming.
3
Press (Zoom(T))/ (Zoom(W)).
ＱＣＩＦ（１７６
×
１４４）
ˎ
Press
(Zoom(T)) to enlarge and (Zoom(W))
to reduce an image.
The zoom is adjusted and the bar is displayed for
the zoom magnification you have set.
4
Use / to select the area to be
trimmed and press
(OK).
The image is trimmed to the selected size.
Continued