User's Guide Part 2

273
1Seg
Setting a Place to Save a
Recorded Video to
<Output of Rec>
You can set a place to save a recorded video.
1
From the Menu, select [1 Seg]
→
[1Seg
setting]
→
[Output of Rec] and press
.
The Save to display appears.
[Data Box]:
A video is saved in the [Video] folder of 1Seg of
the Data Box.
[microSD]:
A video is saved in 1Seg of the microSD memory
card.
2
Select a place to save to and press .
The Output of Rec is set.
●
When you set the Output of Rec while recording
a video, the setting is effective from the next
recording.
Setting the Operation for Incoming Mail
While Watching One Seg
<Mail disp set>
You can set whether to display contents of the
received mail or telop when you receive mail
while watching One Seg.
1
From the Menu, select [1 Seg]
→
[1Seg
setting]
→
[Mail disp set] and press
.
[Display mail]:
Display the screen for confirming whether to
display the contents of mail when you receive
mail.
[Display telop]:
Display the Telop text.
[OFF]:
Do not display anything.
When you watch in the TV style
In the watching display, from the Function menu,
select [Mail disp set]
→
[Mail]/[Telop]/[OFF].
2
Select an operation which is performed
when you receive mail while watching.
The Mail disp set is set.
●
Even if the Mail disp set is set to [Display mail],
while watching One Seg in the TV style or when
receiving mail from the sender who is not saved
in the Phonebook, the mail is not displayed but
the Telop text is displayed.
Displaying a User’s Confirmation Screen for
Data Broadcasting Site
<Rset permission set>
If you select [Yes,from then on] on the screen
for confirming whether to connect to i-mode,
which appears when using data broadcasting
or data broadcasting sites, the confirmation
screen no longer appears. To display the
confirmation screen again, perform the Rset
permission set.
1
From the Menu, select [1 Seg]
→
[1Seg
setting]
→
[Rset permission set] and
press
.
The Security code screen appears.
2
Enter the Security code and press
(OK).
The screen for confirming whether to perform the
Rset permission set appears.
3
Select [Yes] and press .
The Rset permission set is reset.
Continued