User's Guide Part 2

264
1Seg
5
Press (Complete).
A timer for watching/recording a program is saved.
ˎ
To play back a recorded video, see “Displaying/
Playing Back One Seg” (P.277).
To set a timer for recording a program
The display for confirming the notabilia of the
service appears. To save a timer for recording a
program, confirm the contents and select [Yes].
If you do not want to display the confirmation
display next time, select [Yes,from then on]. The
confirmation display no longer appears.
ˎ
To restore the display for confirming the
notabilia of the service, perform the Rset
permission set (P.256).
●
You can also set a timer for watching/recording
a program using a program information provided
by the program guide i-
α
ppli, site, mail, etc.
●
If the Alarm, Schedule alarm, and Booking alarm
are set to start at the same time, the following
priority is applied.
1. Schedule alarm
2. Booking alarm
3. Alarm
●
If there is a timer that is set to start at the same
time as the new timer for recording a program,
the confirmation screen appears. If you select
[Yes], the previously saved timer for recording a
program is overwritten by the new one.
●
When the ending or starting date and time set
for the previously saved timer for recording a
program is the same as the starting or ending
date and time set for the newly saved one
respectively, the confirmation screen appears. If
you select [Yes], the preceding timer terminates
slightly earlier than the specified time.
●
If the Booking list is updated because of the
saved reservation being started while editing a
reservation or other reason, the reservation may
not be saved successfully.
●
If the repeat type of the schedule set for the 31st
is set to [Month], the schedule is set for the last
day of the month for months with less than 31
days.
At the Booking Alarm Time
The alarm tone sounds for about 30 seconds
with the indicator flashing.
Ｂｏｏｋｉｎｇ ａｌａｒｍ
１８：００
○○テレビ
明日の天気
ＯＮ
３０ｓｅｃ．ｂｅｆｏｒｅ
Ｅｙｄ
１０ Ｃｏｕｎｔ
To stop the alarm tone
Press any key. When you stop the alarm tone,
the display informing the release of the alarm
appears. To turn off the display, press (OK) or
.
When you do not stop the alarm tone
The display informing the release of the alarm
appears. To turn off the display, press (OK) or
.
When the Cfm. activation is set to [ON]
After you turn off the display informing the
release of the alarm, the Cfm. activation display
appears. Select [Yes] to activate One Seg.
When the Cfm. activation is set to [OFF]
Press for over a second to activate One
Seg.
●
If you set an i-motion with video and sound
tracks to the alarm tone, a movie in the i-motion
is displayed.
●
If the alarm time comes during a voice/
videophone call or PushTalk communication,
the default alarm tone sounds and default
alarm image is displayed. The vibrator does not
operate.
●
The Booking alarm does not operate in the
following cases.
- When the FOMA terminal is powered off
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software