User's Guide Part 2

254
1Seg
Putting the One Seg Antenna back
1
Change the direction back.
2
Push the One Seg Antenna back while
aligning the top of the One Seg Antenna
with the counter part until it stops.
ˎ
If you use force to put the antenna back without
confirming the correct orientation, it may cause
malfunction.
1
2
■
The display that appears when One Seg is
used for the first time
When One Seg is activated for the first time,
the display for confirming the notabilia of the
service appears. When the FOMA terminal is
in the TV style, switch to the Normal style, and
then check the contents and press
(OK)
(P.240).
■
Battery level
ˎ
If you try to activate One Seg with the battery level
low, the screen for confirming whether to activate
One Seg appears. If you select [Yes], One Seg
is activated. When the battery level becomes low
while watching One Seg, the screen for confirming
whether to quit One Seg appears. When you select
[Yes], One Seg is terminated.
ˎ
When the battery level becomes low, the screen
informing that the battery level becomes low
appears, “
”/“ ”/“ ” flashes while watching One
Seg, and “ ”/“ ”/“ ” flashes while recording a
One Seg program.
ˎ
When the battery level becomes extremely low while
watching or recording a One Seg program, One
Seg is terminated. When you are recording a One
Seg program, the video recorded up to this point is
saved automatically.
■
When there is an incoming call, etc. while
watching One Seg
ˎ
When receiving a voice, videophone, or PushTalk
call while watching One Seg, you can answer the
call by pausing video and sound. After the call is
terminated, the screen for confirming whether to
use Time shift play appears. When you select [Yes],
Time shift play is started.
ˎ
When receiving i-mode mail, SMS, Message R/F
while watching One Seg, the incoming mail display
appears. The display restores when mail reception
is completed. (When the Mail telop disp set is set
to [OFF] and Dur multi task disp is set to [Prefer
operat.])
ˎ
When the Alarm, Schedule alarm, or Booking alarm
time comes while watching One Seg, the alarm is
displayed. The display restores when you stop the
Alarm or Schedule alarm and press
or
in the display informing the release of the alarm.
When you stop the Booking alarm, the screen for
confirming whether to activate One Seg appears
depending on the setting of the Cfm. activation
(P.248) and you can activate it.
●
When the UIM is not inserted, you cancel the
subscription to DoCoMo, or you temporarily
suspend using the FOMA service, you cannot
watch One Seg.
●
Even when you insert the UIM for which you
subscribe to DoCoMo, you may not be able to
activate One Seg if you repeatedly watch One
Seg in the condition the FOMA terminal cannot
communicate such as when the FOMA terminal
is outside of the service area or in the Self mode.
In that case, try to activate One Seg in the
condition the FOMA terminal can communicate
by moving into the FOMA service area.
●
When you activate One Seg for the first time,
activate it within the FOMA service area.
●
Even if the data may be lost or changed as a
result of malfunction, repair, or other handling
of the FOMA terminal, under no condition will
DoCoMo be held liable for any damaged or lost
data saved in the FOMA terminal. Furthermore,
note that the saved information (such as One
Seg recorded videos or still images, TV links, or
information saved in the broadcast storage area)
cannot be moved when you change your FOMA
terminal or have it repaired.
●
If you continue watching One Seg for a long
period of time with the battery being charged,
the life of the battery pack may become shorter.