User's Guide Part 2

253
1Seg
Continued
The saved information may be displayed, or be
sent to TV broadcasters (broadcast stations)
without another input of information when you
browse to the data broadcasting site.
To delete information in the broadcast storage
area, see P.255.
When you replace the UIM with another one,
the screen for confirming whether to reset the
broadcast storage area appears. Select [Yes]
to reset it.
■
Using information in the broadcast storage
area
When information in the broadcast storage area
is used while you are watching a program, the
message “Use saved info? It may include info
used by the same broadcasting gr.” appears.
When you select [Yes], the confirmation screen
does not appear as long as you watch the
same program. If you select [Yes,from then
on], the confirmation screen no longer appears
even if the program is changed.
Other Features
●
One-touch channel selection by the remote-
control numbers (P.244)
●
Switching between the main sound and sub
sound (P.246)
●
Using the program guide i-
α
ppli (P.247)
●
Setting a timer for watching (P.247)
●
Setting a timer for recording (P.247)
●
Displaying and using the data broadcasting
(P.251)
●
Using TVlink (P.252)
●
Recording a video and still image (P.252)
●
Time shift play while watching (P.253)
●
Rapid play with sound at about 1.3x speed
(P.277)
Before Using One Seg
Step to Watch One Seg
Example: When you watch One Seg for the first time
Save a channel list suitable for the
area you use.
Step 1
Set channel list (P.242)
Step 2
Activate One Seg (P.243)
Extend the One Seg Antenna and
activate One Seg.
■
One Seg Antenna
When you use the One Seg function, extend
the One Seg Antenna as illustrated below.
When the One Seg reception is poor, change
the direction of the One Seg Antenna or the
location of the FOMA terminal.
ˎ
Do not use force to change the direction of the One
Seg Antenna.
Using the One Seg Antenna
1
Pull out the One Seg Antenna.
2
Raise the One Seg Antenna.
3
Change the direction.
1
3
3
2