User's Guide Part 2

Tear-off line
123
7654
FOMA SO906i
Quick Manual for “Overseas Use”
■
For Loss, Theft, and Charge Settlement for Overseas
<DoCoMo Information Center> (24-hour service)
From DoCoMo mobile phones
International access number
of your country of stay (Table1)
-81-3-5366-3114
*
(toll-free)
*
The call charges to Japan apply when
you place a call from ordinary phones.
※
Dial +81-3-5366-3114 to get connected when
you place a call from SO906i. (Press and hold
the “0” key for at least one second to enter “+”.)
From ordinary phones
Universal number
International prefix number for
the universal number (Table2)
-800-0120-0151
*
*
The call charges to your country of
stay may apply.
●
For the international access number of
major countries (Table1) and international
prefix number for the universal number
(Table2), see P.13 or P.14 respectively.
■
About Troubles and Repairs for Services Overseas
<Network Technical Support and Operation Center> (24-hour service)
From DoCoMo mobile phones
International access number
of your country of stay (Table1)
-81-3-6718-1414
*
(toll-free)
*
The call charges to Japan apply when
you place a call from ordinary phones.
※
Dial +81-3-6718-1414 to get connected when
you place a call from SO906i. (Press and hold
the “0” key for at least one second to enter “+”.)
From ordinary phones
Universal number
International prefix number for
the universal number (Table2)
-800-5931-8600
*
*
The call charges to your country of
stay may apply.
●
For the international access number of
major countries (Table1) and international
prefix number for the universal number
(Table2), see P.13 or P.14 respectively.
Before Using the FOMA
Terminal Overseas
■
Setting the i-mode
【
In Japan
】
1
Press in the stand-by display
→
[i Menu]
→
[
料金&お申込・設定
]
→
[
オプ
ション設定
]
→
[
海外利用設定
]
→
[
iモー
ド利用設定
]
→
[
利用する
]
→
Enter an
i-mode password
→
[
決定
]
→
.
【
Overseas
】
1
Press in the stand-by display
→
[i Menu]
→
[
海外利用設定
]
→
[
iモー
ド利用設定
]
→
[
利用する
]
→
Enter an
i-mode password
→
[
決定
]
→
.
■
Setting the Remote Control
【
In Japan
】
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Remote
Control]
→
[Activate]
→
[Yes]
→
.
【
Overseas
】
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Int’l roaming]
→
[Remote
access(Int.)]
→
[Yes]
→
.
■
Setting the clock
1
From the Menu, select [Settings]
→
[Management]
→
[Date/time]
→
[Auto
time adjust]
→
[ON]
→
.
Available Network
3G roaming Available
GSM network Available
GPRS network Available
Services Available Overseas
(P.410)
Communication service 3G
GSM GPRS
Voice call
You can use the same mobile phone
number as used in Japan even from an
overseas location to place international
calls to Japan and other countries as well
as ordinary calls in your country of stay.
○○○
Videophone call
You can place international
videophone calls to specific 3G carrier
users overseas and to FOMA users.
○××
i-mode
You can use i-mode even from an overseas location.
○×○
i-mode mail
You can use the same mail address
as used in Japan even overseas
and send/receive i-mode mail.
○×○
SMS
You can use the same mobile phone number
as used in Japan even from an overseas
location to send/receive SMS messages.
○○○
i-Channel
○○○
Data communication
(
Packet communication)
○×○
Network Search Mode
(P.415)
Example:
Changing a carrier to be connected for manual connection
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Int’l
roaming]
→
[Network search mode]
→
.
[Auto]:
Automatically connect to another carrier.
[Manual]:
Manually select a carrier.
[Network re-search]:
Search the carrier to be connected again.
[PLMN setting]:
Set a carrier with the higher-priority for connection.
2
Select [Manual]
→
a carrier
→
.
PLMN Setting
(P.416)
Example: Saving a carrier from the carrier list
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Int’l roaming]
→
[Network search
mode]
→
[PLMN setting]
→
.
2
Select [Unregistered] and press
(Func).
3
Select [Select from List]
→
a carrier
→
.
4
Select a network communication
method
→
[Yes]
→
.
Setting After Returning to Japan
(P.413)
The default setting is to search a network
after the FOMA terminal powered on in
Japan and connect to the FOMA network
(NTT DoCoMo, Inc) automatically.
■
Changing the network to the FOMA
network (NTT DoCoMo, Inc) manually
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Int’l roaming]
→
[Network search
mode]
→
.
2
Select [Manual]
→
[NTT DoCoMo, Inc]
→
.
Display to Be Shown Overseas
(P.413)
While you use the FOMA terminal overseas, the name of
the connected carrier appears in the stand-by display.
○○○○ ○○○○
Connected network
Carrier name
Main clock
ˎ
Display the current
date/time of the
location of stay.
Sub-clock
ˎ
Display the current
date/time of Japan.
ˎ
The following icons show the current
network connection.
Icon Network you can use
(Blue)
3G network (supported packet communication)
(Red)
3G network (not supported packet communication)
GSM network
GPRS network