User's Guide Part 2

436
Appendix/External Devices/Troubleshooting
Connection failed (562)
ˎ
Failed to connect to the i-mode
center. Move to a location with
better radio wave condition
and then retry the operation.
Connection interrupted
ˎ
The communication is
interrupted because of an
error occurrence during data
communication.
Content length exceeds
maximum size for i-motion
ˎ
Failed to retrieve the data
because its volume has
exceeded the maximum size.
Content length exceeds
replayable size for i-motion
ˎ
Failed to retrieve the data
because its volume has
exceeded the maximum size.
Continue using ppli and
transmit data?
ˎ
This message appears
when the number of times of
communication performed
while an i-
α
ppli software
is used has increased
significantly for a certain
period of time. To continue
using the i-
α
ppli software,
select [Yes]. To continue using
the i-
α
ppli software after the
communication is terminated,
select [No]. To quit the i-
α
ppli
software, select [Terminate].
Could not move
ˎ
Failed to move data because
of an error occurrence.
Could not save
ˎ
Failed to save the image,
music data, or i-
α
ppli
software.
ˎ
Failed to save to the microSD
memory card.
ˎ
Failed to receive data during
the infrared/iC communication
or data communication with a
PC.
ˎ
Failed to save the image or
melody scanned by the bar
code reader.
ˎ
Failed to save the i-motion
because the size exceeded
10M bytes. You can set a
Chaku-Uta Full
®
with up to 10M
bytes of i-motion for the ring
tone/Alarm using [Point].
D
Data in IC card is full. Unable
to download. Delete service?
ˎ
Failed to download the data
because the Osaifu-Keitai-
compatible i-
α
ppli IC card is
full of data. When you select
[Yes], the names of the Osaifu-
Keitai services on the card
appear. Select a service name
and delete its Osaifu-Keitai-
compatible i-
α
ppli software
and data from the IC card.
Data transmission is frequent.
Continue transmission?
ˎ
This message appears
when the number of times of
communication performed
while an i-
α
ppli software
is used has increased
significantly for a certain
period of time. To continue
using the i-
α
ppli software,
select [Yes]. To continue using
the i-
α
ppli software after the
communication is terminated,
select [No]. To quit the i-
α
ppli
software, select [Terminate].
Deleted invalid text
ˎ
Characters other than digits
cannot be accepted for
the postal code. They are
discarded.
Download failed
ˎ
Failed to download because of
an error occurrence.
Draft is full. Cannot create
ˎ
The number of saved mail
has reached 50 or there is
not enough memory. Delete
unnecessary saved mail
(P.223).
E
Error in IC card data. Unable
to delete software
ˎ
Failed to delete the software
because data in the Osaifu-
Keitai-compatible i-
α
ppli IC
card contains an error.
Error in image. Does not work
correctly
ˎ
The Flash movie cannot be
played back correctly due to
some errors in the Flash movie.
Error in the dictionary
ˎ
There are some words or
phrases that have failed to
be saved because of an error
in part of the dictionary data
(words or phrases that have
been saved successfully can
be used as dictionary data).
Exceeds max number of
simultaneous call
ˎ
This message appears when
you originate a PushTalk call
to more than four members.
Reduce the number of
members you select to four
or less and originate the call
again.
F
Final number exists. Cannot shoot
ˎ
The microSD memory card
contains a file with the
maximum number (999-9999),
so no more files can be saved
in it. Delete the image files from
the largest file numbers (P.321).
I
ppli stand-by display
terminated due to security
error
ˎ
The i-
α
ppli stand-by display
was canceled since it has
attempted an unauthorized
operation. Check the security
error history (P.250).
ppli To function is not set
ˎ
The i-
α
ppli To is set to [No].
Set the i-
α
ppli To to [Yes] and
then retry the operation (P.241).
IC card is locked
ˎ
The IC card lock is set. Cancel
the IC card lock and then retry
the operation (P.262).