User's Guide Part 2

435
Appendix/External Devices/Troubleshooting
Error Messages
ˎ
In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo
own code that DoCoMo displays on the FOMA terminal.
A
A mail address is unregistered
ˎ
No mail address for posting
is saved for the selected blog
service. Save a mail address
(P.358).
Accessing IC card. Cannot
delete
ˎ
Failed to delete the software
because data in the Osaifu-
Keitai-compatible i-
α
ppli IC
card is being accessed.
Address is not valid (451)
ˎ
Failed to send the mail
because of unknown mail
address. Enter the correct mail
address and send it again.
Another function is active.
Cannot activate this at the
same time
ˎ
Another function that cannot
be run simultaneously by
multitask-ing is active. Quit the
function, if it is not being used,
and then retry the operation
(P.353).
Authentication failed
ˎ
Failed in verifying the
authentication password.
Set the password so that it
matches the one of the other
device and then retry the
operation (P.329, 330, 332,
333).
ˎ
The authentication type (one/
all) does not match the one set
for the other device. Set the
same authentication type (one/
all) on both party to exchange
data using the infrared or iC
communication (P.329, 330,
332, 333).
Authentication type is not
supported (401)
ˎ
Failed to connect to the site or
website, etc. because of the
unsupported authentication
type.
C
Camera function error. Quit
the application
ˎ
The Camera mode is
terminated because of an error
occurrence. To continue to use
the camera, restart the Camera
mode.
Camera function error.
Save the data and quit the
application
ˎ
The Camera mode is
terminated after the image
is saved because of an error
occurrence. To continue to use
the camera, restart the Camera
mode.
Camera function error. Switch
to Substitute image
ˎ
The videophone image is
switched to the substitute
image because of an error
occurrence. Switch it again to
the camera image (P.51).
Cannot execute because of
memory shortage
ˎ
Failed to execute the function
because of insufficient
memory.
Cannot move. Not enough
memory
ˎ
The remaining memory
in the microSD memory
card is insufficient. Delete
unnecessary data (P.103, 193,
194, 223, 258, 321, 366, 373).
Cannot read. You need to
format
ˎ
The microSD memory card is
not formatted correctly. Format
it using the FOMA terminal
(P.313).
Cannot support content
ˎ
Data that is not supported
by the FOMA terminal is
contained in the contents.
Cannot switch mode
ˎ
Failed to set to the microSD
or MTP mode because of
a communication using the
FOMA USB Cable with Charge
Function 01/02 (optional) in
progress.
Certificate is rejected
(tampered)
ˎ
There are some problems with
the certificate.
Check address
ˎ
The SMS address exceeds 21
digits or 186/184 is entered at
the beginning of the address.
Enter the correct address and
send it again (P.234).
Check SMS Center setting
ˎ
The incorrect host is set at the
SMSC. Restore the host to
“DoCoMo”, the default setting
at the time of purchase (P.236).
Connection failed
ˎ
The host number set for the
Host selection is incorrect.
Restore the host number to
“i
モード
”, the default setting at
the time of purchase (P.197).
ˎ
Failed to connect because of
weak radio wave condition.
Retry to connect from a
place with better radio wave
condition.
ˎ
Failed to connect to a line due
to a network problem. Retry to
connect after a while.
ˎ
Failed to connect to a line for
some reason when placing a
videophone call.
Connection failed (403)
ˎ
Failed to connect to i-mode for
some reason. Retry to connect
(P.186).
Connection failed (503)
ˎ
Failed to connect to a line due
to a network problem. Retry to
connect after a while.
Continued