User's Guide Part 2

218
i-
α
ppli
Running i-
α
ppli
Automatically
<Auto-start>
Enabling/Disabling Auto-Start
You can set whether to start i-
α
ppli software
automatically on the FOMA terminal.
1
From the Menu, select [i appli]
→
[i
α
ppli
setting]
→
[Auto-start] and press
.
2
Select [Yes]/[No] and press .
Whether to enable the Auto-start is set.
Setting the Start Date and Time
The i-
α
ppli software can be started
automatically. You can set the starting date/
time and day of the week and whether to use
the software’s automatic start for each i-
α
ppli
software.
1
From the list of i-
α
ppli software, select
the software and press
(Func).
The Function menu appears.
2
Select [Auto-start] and press .
Ａｕｔｏ−ｓｔａｒｔ
Ｕｓｅｒ ｓｅｔ
ＯＦＦ
ＳＷ ｓｅｔ
Ｉｎｖａ
[User set]:
Set the staring date/time and day of the week for
each software.
[SW set]:
Set whether to start the software using the
software’s auto-start function.
3
Select [User set] and press .
Ｕｓｅｒ ｓｅｔｔｉｎｇ
Ｓｔｙｌｅ
ＯＦＦ
Ｄａｔｅ ２００８／０２／０１ Ｆｒｉ
Ｔｉｍｅ
０９：０５
Ｄａｙ
Ｍｏｎ
4
Select a style of the Auto-start time at
[Style].
[OFF]:
Do not set the start time.
[D/T]:
Start the software automatically at the specified
date and time.
[Eyd]:
Start the software automatically at the specified
time everyday.
[Week]:
Start the software automatically at the specified
time on every specified day of the week.
5
Enter the date/time/day of the week.
ˎ
Enter the date/time/day of the week according to
the style of the auto-start time selected in step 4.
6
Press (Complete).
7
Select [SW set] and press .
The SW set display appears.
8
Select [Valid]/[Invalid] of the Auto-start
function of the software at [Set].
The Auto-start is set.
●
The Auto-start does not operate in the following
cases.
- When the FOMA terminal is powered off
- During a call/communication
- When the date/time is not set
- When another function is executed
- When the Alarm/Schedule alarm is set to start
at the same time as the Auto-start
- When the Lock all/Personal data lock is set
- When the Lock key is set
- When the Omakase Lock is set
- When 2in1 is set to the B mode (when i-
α
ppli
with mail software is used or i-
α
ppli uses
mail)