User's Guide Part 2

394
Network Services
※
1 To place a call, Number A is the default setting
for the Phonebook of the A/Common setting, and
Number B is the one for the Phonebook of the B
setting.
※
2 When the phone number of placing/receiving
a call or sending/receiving SMS and mail
address of receiving/sending mail are saved
in the Phonebook, after comparing them with
the phonebook data, the name saved in the
Phonebook of each phone number and mail
address is displayed.
※
3 When you save the phonebook entries or mail from
the microSD memory card to the FOMA terminal,
you can save them based on each file in the
microSD memory card.
※
4 When the sender’s mobile phone is not compatible
with the 2in1 functions, Number A is applied.
※
5 When you compose new mail in the Dual mode,
you can select a mail address from the Phonebook
of the B mode setting but note that mail is sent
from Address A.
※
6 Except i-
α
ppli with mail, i-
α
ppli using mail, and
i-
α
ppli stand-by display.
※
7 Except i-
α
ppli stand-by display.
Using OFFICEED
<OFFICEED>
“OFFICEED” is a fixed-rate service within
a group provided by IMCS (Indoor Mobile
Communication System). You may need to
apply separately to use this service.
ˎ
For more information (provided only in Japanese),
see the DoCoMo’s website for business customers
(http://www.docomo.biz/d/212/).
Saving a New Service to
Use It
<Additional service (USSD) registration>
When DoCoMo adds a new network service,
you can save the service in the Menu and use
it.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Additional service] and press
.
2
Set each item.
Menu item Operation
Register USSD
[Register USSD]
→
[Unregistered]
→
(Edit)
→
Enter a name of the
service at [Service] (within 10 full-
width or 20 half-width characters)
→
Enter a USSD command at [USSD]
(within 20 digits)
→
(Complete).
●
To use a service
Select [Register USSD]
→
a
service.
●
To delete a service
[Register USSD]
→
Move the
cursor to a service and press
(Func)
→
Select [Delete one] (to
delete all services, select [Delete
all]
→
enter the Security code)
→
Select [Yes].
Register ans
word
[Register ans word]
→
[Unregistered]
→
(Edit)
→
Enter
an answering message at [Answer
wording] (within 10 full-width or 20
half-width characters)
→
Enter a
USSD command at [USSD] (within
20 digits)
→
(Complete).
●
To delete an answering message
[Register ans word]
→
Move
the cursor to an answering
message and press (Func)
→
Select [Delete one] (to delete
all answering messages, select
[Delete all]
→
enter the Security
code)
→
Select [Yes].