User's Guide Part 2

392
Network Services
Menu
item
Operation
Set call/
receive
No.
To identify the call placed or received using
Number B, set the font color and ring tone of
the incoming/receiving call display.
●
Set the font color
Select [Set call/receive No.]
→
[Disp. call/rcv.
No.]
→
[dark]/[light].
●
Set the ring tone
Select [Set call/receive No.]
→
[Ringtone
for Number B]
→
[Incoming call]/[Incoming
V.phone]
→
a ring tone from MUSIC/
i-motion/Melody of the Data Box.
ˎ
You can set the following files.
Category File format File size Image size
MUSIC
※
AAC-LC/
HE-AAC
Max. 5M
bytes
−
i-motion
※
MP4
Max. 10M
bytes
Max. [VGA
(640
×
480)]
Melody SMF/
MFi
Max. 350K
bytes
−
※
Some files may not be set.
ˎ
If you select [ON] at [Link incoming call],
the ring tone for the Incoming V.phone
follows the setting for the Incoming call.
ˎ
When you receive a call without the caller
ID, the ring tone follows the setting of
[Ringtone for Number B].
2in1
function
OFF
Quit using the 2in1 functions.
Select [2in1 function OFF]
→
[Yes].
Receive
avoid.
setting
Set the restriction for incoming call of Number
A and Number B.
●
Set the restriction for incoming call for
Number A and Number B individually
Select [Receive avoid. setting]
→
[Change
receive avoid.]
→
[Rcv. avoid. (Number
A)]/[Rcv. avoid. (Number B)]
→
[Receive]/
[Avoid]/[Unchange]
→
(Complete).
●
Check the current setting
Select [Receive avoid. setting]
→
[Check
receive avoid.]
→
[Yes].
●
Activate/deactivate the Mode link
When the A mode is used, allow to receive
a call only for Number A. When the B mode
is used, allow to receive a call only for
Number B. When the Dual mode is used,
allow to receive a call for both Number A
and Number B.
Select [Receive avoid. setting]
→
[Mode link
setting]
→
[Yes].
ˎ
When the Mode link setting is set to
“Activate”, you cannot change the mode
while the FOMA is outside of the service
area.
●
Set the Receive avoid. setting from
overseas
Select [Receive avoid. setting]
→
[Rcv.
avoid. set(Int.)]
→
Operate as instructed by
the guidance.
Selecting a Phone Number
When Placing a Call
When the Dual mode is set, you can select a
phone number to place a call.
1
Enter a phone number in the stand-by
display and press
.
To place a videophone call
Press (V.phone).
ドコモ次郎
Ｓｅｌｅｃｔ ｎｕｍｂｅｒ
ｔｏ ｃａｌｌ
Ｎｕｍｂｅｒ Ａ
Ｎｕｍｂｅｒ Ｂ
Ｃａｎｃｅｌ
2
Select [Number A]/[Number B] and
press
.
Place a call from the selected phone number.
●
When you place a call using the Redial/Received
record, the phone number which was used to
receive/place a call previously is displayed and
the call is placed using this phone number.