User's Guide Part 2

384
Network Services
Using the Voice Mail Service
The Voice Mail Service takes messages for
you, as long as it answers a call with the
answering message, if there is an incoming
voice or videophone call when you are in a
location without the radio wave, while the
FOMA terminal is powered off, or when you are
in a situation where you cannot answer a call.
ˎ
When the Voice Mail Service and Record Message
(P.72) are set simultaneously, and if you want to give
priority to the Voice Mail Service, set the ring time for
the Voice Mail Service shorter than the time before
starting the answering message for the Record
Message.
ˎ
When the Voice Mail Service is set to “Activate”
and if you do not answer an incoming voice or
videophone call, the call is saved in the Received
record as a “Missed call” and the notification icon
“
” (Missed call) appears in the stand-by display.
ˎ
When the Call Forwarding Service is set to “Activate”,
the Voice Mail Service is automatically deactivated.
■
Basic flow of the Voice Mail Service
Step 1
Activate the service.
Step 2
The caller leaves a message.
Step 3
Play back the Voice Mail message.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Voice
Mail] and press
.
2
Set each item.
Menu item Operation
Activate
※
Select [Activate]
→
[Activate]/
[Ring+Activate] (
→
Enter the ring
time)
→
[Yes].
ˎ
When you select [Ring+Activate],
you can set the ring time (000 to
120 seconds) and activate the
Voice Mail Service.
ˎ
When you select [Ring+Activate],
the Voice Mail Service is
activated by Number A.
ˎ
When 2in1 is set to the B mode,
you cannot select the method of
activating the Voice Mail Service.
Set ring time
Select [Set ring time]
→
Enter the
ring time (000 to 120 seconds)
→
(Complete).
Menu item Operation
Deactivate
※
Select [Deactivate]
→
[Yes].
Check setting
Select [Check setting].
ˎ
When 2in1 is set to either the
B or Dual mode, the screen for
selecting either Number A or
Number B appears.
Play messages
※
Select [Play messages]
→
[Yes]
→
Operate as instructed by the
guidance.
ˎ
The displayed number is the
number that the guidance
announces when playing back
new Voice Mail messages.
Already saved Voice Mail
messages are not included.
ˎ
You can also play back the
record message by pressing
(Link) in the stand-by display and
selecting “ ”.
Voice Mail
setting
※
Select [Voice Mail setting]
→
[Yes]
→
Operate as instructed by the
guidance.
Check
messages
Select [Check messages].
ˎ
When a new message is stored
at the Voice Mail Service Center,
the notification icon “
” (Voice
Mail message) appears in the
stand-by display.
Tone/Vibrate
notice
(Default: ON)
Set whether to alert you of a new
message with the mail tone when it
is received at the Voice Mail Service
Center.
Select [Tone/Vibrate notice]
→
[ON]/[OFF].
Delete VM icon
Select [Delete VM icon]
→
[Yes].
Missed
Call
notice
Activate Notify you of a new message by
SMS when it is received while the
FOMA terminal is powered off or
outside of the service area.
Select [Missed Call notice]
→
[Activate]
→
[All calls]/[With Caller
ID]
→
[Yes].
ˎ
Even if the caller is saved in the
Phonebook, the caller ID of the
caller is notified and the name
saved in the Phonebook is not
displayed.
Deactivate
Select [Missed Call notice]
→
[Deactivate]
→
[Yes].
Check
setting
Select [Missed Call notice]
→
[Check setting].
※
When 2in1 is set to the Dual mode, the screen for
selecting either Number A or Number B appears.