User's Guide Part 2

346
Other Convenient Functions
Multiaccess Feature
<Multiaccess>
Multiaccess is a function that enables you to
use a voice call, packet communication, and
SMS functions at the same time.
ˎ
For multiaccess combinations, see P.435.
Voice call 1 line
i-mode, i-
α
ppli, i-mode mail, and packet
communication by connecting a PC
1 line
SMS 1 line
●
Charge is required for the use of each
communication line during multiaccess.
●
You cannot use multiaccess during a videophone
call or 64K data communication, but you can
receive SMS.
Main Functions That Can Be
Performed Using Multiaccess
Starting Other Communication during a
Voice Call
Example: Connecting to i-mode during a voice call
1
Press (MENU) during a voice call and
press
(New TASK).
The menu display appears.
2
Select [i-mode]
→
[i Menu]
→
[
メニュー/検
索
] (Menu/Search) and press
.
You can access i-mode while the call is being
connected.
To send mail
Select [Mail]
→
[Compose message] and
compose mail and send it.
To perform packet communication using a connected
PC
Establish connection for packet communication
using PC operation.
To switch the display
Press (MENU) and select a task icon.
Receiving Mail during a Voice Call
Ｔａｌｋｉｎｇ
Ｃａｌｌ ｄｕｒａｔｉｏｎ １２：３４
You receive mail while the call is being connected.
●
If you receive i-mode mail, SMS, or Message R/F
while you are talking on the phone, the ring tone,
incoming indicator, and vibrator do not operate.
Placing a Voice Call during i-mode/Packet
Communication
Example: Placing a voice call during i-mode
1
Press (MENU) during i-mode or packet
communication.
The menu display appears and the cursor moves to
the TASK MENU.
2
Select “ ” (Stand-by) and press .
3
Enter a phone number and press .
Place a voice call while you continue to use i-mode
or packet communication.
To switch the display during a call
Press (MENU) and select a task icon.
●
When you place a videophone call while
i-mode is being used, the i-mode connection
is disconnected and your videophone call is
placed.