User's Guide Part 2

325
Data Display/Edit/Management
Receiving Data Using iC
Communication
Receiving Data
1
Place the FeliCa mark “ ” of the FOMA
terminal over that of the other terminal in
the stand-by display on both terminals.
The vibrator vibrates and the FeliCa Sign lights.
“ ” changes to “ ” and data exchange is
started.
The screen for confirming whether to save data
appears.
2
Select [Yes] and press .
The received data is saved.
When you receive Phonebook data
The screen for confirming whether to save data
in the PushTalk phonebook appears. If you select
[Yes], the data is saved in both the PushTalk
and FOMA terminal phonebooks. If you select
[No], the data is saved in the FOMA terminal
phonebook only. When there are several phone
numbers, select the phone number to be saved
in the PushTalk phonebook.
Receiving All Data
ˎ
It is necessary that you and the sender determine
the 4-digit authentication password beforehand.
Example: Adding received data
1
Place the FeliCa mark “ ” of the FOMA
terminal over that of the other terminal in
the stand-by display on both terminals.
The vibrator vibrates and the FeliCa Sign lights.
“ ” changes to “ ”.
Ｓｅｌｅｃｔ ｔｈｅ ｗａｙ
ｔｏ ｓａｖｅ
Ａｄｄ
Ｏｖｅｒｗｒｉｔｅ
[Add]:
Save received data by adding to the existing
data.
[Overwrite]:
The screen for confirming whether to overwrite
the existing data with the received data appears.
Note that all existing data is deleted if you select
[Yes].
2
Select [Add] and press .
The Security code screen appears.
3
Enter the Security code and press
(OK).
The Authentication password screen appears.
4
Enter the authentication password.
Data exchange is started and the data is added to
the existing data.
To cancel receiving
Press (Cancel).
Sending Data Using iC
Communication
Sending Data
1
Select data to be sent and press (Func).
The Function menu appears.
2
Select [iC transmission] and press .
“ ” changes to “ ” and the screen for
confirming whether to begin data exchange
appears.
To send a still image/movie displayed in the Camera
mode
From the Function menu, select [ ](Send data)
→
[ ](iC transmission).
To send one entry in the Phonebook/Text Memo
Move the cursor to the data and from the
Function menu, select [iC transmission]
→
[iC
transmission].
3
Select [Yes] and press .
The message “Place over another one” appears.
4
Place the FeliCa mark “ ” of the FOMA
terminal over that of the other terminal.
The FeliCa Sign lights.
Data exchange is started.
Continued