User's Guide Part 2

323
Data Display/Edit/Management
Sending All Data
ˎ
It is necessary that you and the receiver determine
the 4-digit authentication password beforehand.
1
Press (Func) in the folder list of data
to be sent.
The Function menu appears.
2
Select [Send all Ir data] and press .
“ ” changes to “ ” and the Security code
screen appears.
To send all entries in the Phonebook/Text Memo
From the Function menu in the list of data, select
[Send Ir data]
→
[Send all Ir data].
To send all entries in the Schedule
From the Function menu in the calendar display,
select [Send all Ir data].
To send all ToruCa cards
From the Function menu in the folder list, select
[Send all Ir data]
→
[Yes]
→
[Yes].
3
Enter the Security code and press
(OK).
The Authentication password screen appears.
4
Enter the authentication password.
The screen for confirming whether to begin the
infrared communication appears.
5
Select [Yes] and press .
The infrared communication is started and data
exchange is started.
To cancel sending
Press (Cancel).
Sending a Still Image Using the
High-Speed Infrared Communication
You can send a JPEG image saved in My
picture of the Data Box or microSD memory
card to the IrSimpleShot™ function-compatible
devices using the high-speed infrared
communication.
ˎ
IrSimpleShot™ function is the one-way
communication, so send data without checking the
answer from the receiver. Therefore, the sender side
is completed normally even if the receiver cannot
receive data.
Example: Sending an image in My picture of the Data
Box
1
From My picture file list, select an image
and press
(Func).
The Function menu appears.
2
Select [Send Ir data]
→
[Send IrSS] and
press
.
“ ” changes to “ ” and the screen for
confirming whether to begin the IrSimpleShot™
communication appears.
To send a still image displayed in the Camera mode
From the Function menu, select [ ](Send data)
→
[ ](Send IrSS).
To send an image in the microSD memory card
Select [Send IrSS].
3
Select [Yes] and press .
The high-speed infrared communication is started
and data transfer begins.
After completing to send data, the screen informing
the completion appears.
4
Select [End] and press .
The high-speed infrared communication ends.
To send the same data again
Select [Retry].