User's Guide Part 2

322
Data Display/Edit/Management
Receiving Data Using the Infrared
Communication
<Receive Ir data>
Receiving Data
1
From the Menu, select [LifeKit]
→
[Receive Ir data]
→
[Receive] and press
.
“ ” changes to “ ” and the screen for
confirming whether to begin the infrared
communication appears.
2
Select [Yes] and press .
The infrared communication is started and data
exchange is started.
The screen for confirming whether to save data
appears.
3
Select [Yes] and press .
The received data is saved.
When you receive Phonebook data
The screen for confirming whether to save data
in the PushTalk phonebook appears. If you select
[Yes], the data is saved in both the PushTalk
and FOMA terminal phonebooks. If you select
[No], the data is saved in the FOMA terminal
phonebook only. When there are several phone
numbers, select the phone number to be saved
in the PushTalk phonebook.
Receiving All Data
ˎ
It is necessary that you and the sender determine
the 4-digit authentication password beforehand.
Example: Adding received data
1
From the Menu, select [LifeKit]
→
[Receive Ir data]
→
[Receive all] and
press
.
“ ” changes to “ ”.
Ｓｅｌｅｃｔ ｔｈｅ ｗａｙ
ｔｏ ｓａｖｅ
Ａｄｄ
Ｏｖｅｒｗｒｉｔｅ
[Add]:
Save received data by adding to the existing
data.
[Overwrite]:
The screen for confirming whether to delete the
existing data appears. Note that all existing data
is deleted if you select [Yes].
2
Select [Add] and press .
The Security code screen appears.
3
Enter the Security code and press
(OK).
The Authentication password screen appears.
4
Enter the authentication password.
The screen for confirming whether to begin the
infrared communication appears.
5
Select [Yes] and press .
The infrared communication is started. Data
exchange is started and the data is added to the
existing data.
To cancel receiving
Press (Cancel).
Sending Data Using the Infrared
Communication
<Send Ir data>
Sending Data
1
Select data to be sent and press (Func).
The Function menu appears.
2
Select [Send Ir data] and press .
“ ” changes to “ ” and the screen for
confirming whether to begin the infrared
communication appears.
To send data from the still image file list in My
picture of the Data Box or displayed in the Camera
mode
Move the cursor to the data and from the
Function menu, select [Send Ir data]
→
[Send Ir
data].
To send a still image displayed in the Camera mode
From the Function menu, select [ ](Send data)
→
[ ](Send Ir data).
To send a movie displayed in the Camera mode
From the Function menu, select [ ](Send data)
→
[ ](Send Ir data).
To send one entry in the Phonebook/Text Memo
Move the cursor to the data and from the
Function menu, select [Send Ir data]
→
[Send Ir
data].
3
Select [Yes] and press .
The infrared communication is started and data
exchange is started.