User's Guide Part 1

94
Phonebook
Dialing Quickly to Frequently
Called Numbers
<2-touch dial>
A call can be placed easily to the recipients
saved in memory numbers from 000 to 009 by
using a shortcut.
It is useful to save frequently used phone
numbers in memory numbers from 000 to 009.

When the Secret display is set to [OFF], the 2-touch
dial cannot be used to place a call to a phone
number saved as Secret.
Example: Placing a call to the recipient saved in the
memory number 001
1
Enter the last one digit of the memory
number (0 to 9) in the stand-by display.
To check a recipient’s data saved in a memory
number
Enter the memory number (one or two digits) and
press or . A list of used memory numbers
and their associated entries appears with the
entered memory number highlighted.
2
Press .
After about five seconds, the call is connected to
the first phone number of the recipient saved in
memory number 001.
To place a videophone call
Press (V.phone).
To send mail
Press (Mail).
To send SMS
Press (Mail) for over a second.
●
The call can be placed or SMS can be sent to
the recipients saved in memory numbers from
010 to 099 by entering the last two digits (10 to
99) of the memory numbers.
Storing (Restoring/Updating) the Phonebook at the
Data Security Service Center
<Data Security Service>
You can use the Data Security Service to store
the FOMA terminal phonebook at the Data
Security Service Center. You can update or
restore the stored Phonebook by connecting to
the Data Security Service Center.

Data Security Service is a paid service that requires
a subscription. For details on this service, see
the “Mobile Phone User’s Guide
【
i-mode
】
FOMA
version”.

You cannot save the UIM phonebook at the Center.
Storing/Updating/Restoring the
Phonebook
1
From the Menu, select [LifeKit]
→
[Data
Security Service]
→
[Connect to Center]
and press
.
The Security code screen appears.
To connect to the Data Security Service Center from
the Phonebook
From the Function menu in the Phonebook,
select [Cnct to Center].
2
Enter the Security code and press
(OK).
The screen for confirming whether to connect to the
Data Security Service Center appears.
3
Select [Yes] and press .
The call is connected to the Data Security Service
Center and the data is updated. When the update
is completed, the update result screen appears.
●
The automatic update of the Phonebook may fail
when another function is executed. In this case,
“ ” (PB update failed) appears in the stand-by
display.