User's Guide Part 1

81
PushTalk
2
Select a group and press .
○○○同好会
携帯あき子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｄｉａｌｉｎｇ ＰＴ ｇｒｏｕｐ
Ｍｙｓｅｌｆ
○○○同好会
携帯あき子 Ｃａｌｌｉｎｇ
携帯はる子 Ｃｏｎｎｅｃｔｅｄ
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
Ｏｎ ＰｕｓｈＴａｌｋ
When a PushTalk call is
originated, the signal tone
sounds.
To originate a call to specific
members by selecting them
from a group
Select a group
→
members and press .
To speak
Press while the floor
is open. You can speak
while you press and hold
.
3
Press to end the communication.
●
When originating a PushTalk call to a group, you
can originate a call to up to four members even if
more than five members are saved in the group.
Deleting a PushTalk
Phonebook Entry
You can delete members saved in the PushTalk
phonebook using three methods.
Example: Deleting a member
1
Press for over a second in the
stand-by display.
To delete several members
From the Function menu, select [Delete]
→
[Select&delete], select members, press
(Delete), and select [Yes]/[Delete from main].
To delete all members
From the Function menu, select [Delete]
→
[Delete all], enter the Security code, and select
[Yes]/[Delete from main].

When 2in1 is used, the screen informing
to delete members of all modes of the
Phonebook 2in1 setting appears. If you
select [Yes], the members of all modes of the
Phonebook 2in1 setting are deleted.
To reset a group to the default setting
Press (Group), move the cursor to a group
and from the Function menu, select [Reset
group]
→
[Yes].
2
Select a member and press (Func).
The Function menu appears.
3
Select [Delete]
→
[Delete one]
→
[Yes]
and press
.
The selected member is deleted.
To delete the selected member from the FOMA
terminal phonebook
Select [Delete]
→
[Delete one]
→
[Delete from
main].
Using the PushTalk
Phonebook
<PushTalkPlus>
You can connect to the network and use the
PushTalkPlus service (P.80).

To use the PushTalkPlus service, you must subscribe
to this service.
1
Press for over a second in the
stand-by display and press
(Func).
The Function menu appears.
2
Select [NW connection]
→
[Yes] and
press
.
The call is connected to the network.
Setting the PushTalk
Operation
<PushTalk setting>
Setting Whether to Answer a
Call Automatically
You can set whether to answer an incoming
PushTalk call automatically using the hands-
free function.
1
From the Menu, select [Settings]
→
[Application]
→
[PushTalk]
→
[Auto
answer setting] and press
.
[ON]:
A PushTalk call you receive is answered
automatically using the hands-free function.
When the Manner mode is set, the call is not
answered automatically.
[OFF]:
A PushTalk call you receive is answered by
pressing
, , etc.
2
Select [ON]/[OFF] and press .
The Auto answer setting is set.
Continued