User's Guide Part 1

80
PushTalk
Saving a Member to a Group
1
Press for over a second in the
stand-by display and press
(Group).
The Group list display appears.
2
Select a group and press .
The Member list display of the selected group
appears.
3
Press (Edit).
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｓｅｌｅｃｔ ｍｅｍｂｅｒ ４／１９
4
Select a member and press .
“ ” appears on the selected member.
To cancel all selections
Press (Rel all).
5
Press (Complete).
The selected member is saved in the group.
Originating a PushTalk Call
Using the PushTalk Phonebook
If you save persons as members in the
PushTalk phonebook, you can originate a
PushTalk call to several persons.

When 2in1 is set to the B mode, you cannot use the
PushTalk phonebook.

When 2in1 is set to the Dual mode, you cannot use
members for which the Phonebook 2in1 setting is
set to [B].
1
Press for over a second in the
stand-by display, select a member, and
press
.
Ｍｅｍｂｅｒ
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
“ ” appears for the selected member.
To display phone numbers
Press to switch the display temporarily
between names and phone numbers.
2
Press .
携帯あき子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｄｉａｌｉｎｇ ＰＴ ｇｒｏｕｐ
Ｍｙｓｅｌｆ
携帯あき子 Ｃａｌｌｉｎｇ
携帯はる子 Ｃｏｎｎｅｃｔｅｄ
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
Ｏｎ ＰｕｓｈＴａｌｋ
When a PushTalk call is
originated, the signal tone
sounds.
To speak
Press while the floor
is open. You can speak
while you press and hold
.
3
Press to end the communication.
Originating a PushTalk Call from
the Group
1
Press for over a second in the
stand-by display and press (Group).
Ｇｒｏｕｐ
○○○同好会
△△△クラブ
○△○愛好会
グループ
４
グループ ５
グループ ６
グループ ７
グループ ８
グループ ９
グループ １０
グループ １１
グループ １２
To display group numbers
When saved, group icons are displayed instead
of group numbers. Press to switch the
display temporarily between group icons and
group numbers.