User's Guide Part 1

74
Voice/Videophone Calls
Using the Hands-free Function
You can set whether to use the hands-free
function during a videophone call.
1
From the Menu, select [Settings]
→
[Call]
→
[Videophone]
→
[Hands-free] and
press
.
[ON]:
You hear the recipient’s/caller’s voice from the
speaker during a videophone call.
[OFF]:
You hear the recipient’s/caller’s voice from the
earpiece during a videophone call.
2
Select [ON]/[OFF] and press .
The Hands-free is set.
●
When the Flat-plug Earphone/Microphone with
Switch (optional) is connected to the FOMA
terminal, you hear a recipient’s voice from the
Earphone/Microphone, regardless of the Hands-
free setting.
Setting How to Answer a
Videophone Call during i-mode
You can set how to answer a videophone
call received during i-mode or packet
communication, for example, sending or
receiving mail.
1
From the Menu, select [Settings]
→
[Call]
→
[Videophone]
→
[V.ph while packet]
and press
.
[Prefer V.phone]:
Receive a videophone call. When you answer the
videophone call, the packet communication in
progress is disconnected.
[Prefer packet]:
Continue the packet communication without
receiving a videophone call. The received call is
saved in the Received record.
[V.ph voicemail]:
Connect a received videophone call to the Voice
Mail Service Center.
[Call forwarding]:
Connect a received videophone call to a
forwarding phone number.
2
Select the operation to be performed
when you receive a videophone call
during i-mode communication and press
.
The V.ph while packet is set.
Setting Notice for Switching between Voice
and Videophone Calls
<Videophone switch notice>
You can set whether to notify the recipient/
caller that the FOMA terminal is capable of
switching between voice and videophone calls.

You cannot perform this setting when you are
outside of the service area or in a place where
radio waves do not reach, or during a voice or
videophone call.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[V.ph
switch notice] and press
.
Ｖ．ｐｈ ｓｗｉｔｃｈ ｎｏｔｉｃｅ
Ｉｎｄｉｃａｔｉｏｎ ＯＮ
Ｉｎｄｉｃａｔｉｏｎ ＯＦＦ
Ｃｈｅｃｋ ｓｅｔｔｉｎｇ
2
Select [Indication ON]
→
[Yes] and press
.
When you do not want to notify
Select [Indication OFF]
→
[Yes].
To check the setting
Select [Check setting].