User's Guide Part 1

67
Voice/Videophone Calls

The Public mode can be set or canceled even if
“ ” is displayed.

The Public mode cannot be used during data
communication.
1
Press ( ) for over a second in the
stand-by display.
The Public mode is set and “ ” appears.

When the Manner mode and the Public mode are
set simultaneously, the Public mode has priority.
To cancel the Public mode
Press ( ) for over a second in the stand-by
display. The Public mode is canceled and “ ”
disappears.
■
When the Public mode (Drive mode) is set

Even if there is an incoming call, the ring tone does
not sound and you cannot answer it. The notification
icon of missed call appears and the call is saved in
the Received record. The guidance for the Public
mode is played back to inform the caller that you are
unable to answer the call because you are driving or
in a place where talking on a mobile phone should
be avoided, and then the call is disconnected.

Even if there is an incoming PushTalk call, you
cannot answer it. The notification icon of missed
call appears and the call is saved in the Received
record. If the received call is for the PushTalk
communication among several persons, the
message “Driving” appears in the On PushTalk
display of the members.

The call can be placed normally.

The following tones do not sound and the vibrator,
etc. does not operate.
- Ring tone - Alarm tone
- Schedule alarm - Battery alarm
- Alarm for the Call cost limit
- i-
α
ppli software sound - Charge sound
- ToruCa receive completion tone
- Position location sound
- Location notice sound
- Loc. provide/accept tone
- Loc. provide/check tone

For operation for an incoming call when the Public
mode (Drive mode) and each network service are
set simultaneously, see “Operation for an incoming
call when network services and the Public mode
(Drive mode/Power OFF) are set” (P.70).
Using the Public Mode
(Power off)
<Public mode (Power off)>
The Public mode (Power off) is an automated
answering service which takes into account
the manners in highly public places. When the
Public mode (Power off) is set, the guidance
is played back to inform the caller that you are
unable to answer the call because you are in a
place where it is required to power off a mobile
phone (such as in hospitals, airplanes, and
near priority seats in trains), provided that there
is an incoming call when the FOMA terminal is
powered off, and then the call is disconnected.
1
Press + .
The Public mode (Power off) is set. (No change
appears on the stand-by display.)
To cancel the Public mode (Power off)
Press + .
To check the setting
Press + .
■
When the Public mode (Power off) is set

If there is an incoming call when the FOMA terminal
is powered off or you are outside of the service area
or in a location without the radio wave, the guidance
for the Public mode (Power off) is played back to
inform the caller that you are unable to answer the
call because you are in a place where it is required
to power off a mobile phone, and then the call is
disconnected.

You cannot answer an incoming PushTalk call. If
the received call is for the PushTalk communication
among several persons, the message
“
Disconnect” appears in the On PushTalk display
of the members.

For operation for an incoming call when the Public
mode (Power OFF) and each network service are
set simultaneously, see “Operation for an incoming
call when network services and the Public mode
(Drive mode/Power OFF) are set” (P.70).
Operation for an incoming call when network
services and the Public mode (Drive mode/
Power OFF) are set
Service
When a voice call
is received
When a videophone
call is received
The Voice
Mail
Service
※
1
After the guidance
for the Public mode
is played back, the
call is connected
to the Voice Mail
Service Center.
The video guidance
for the Public mode is
not played back and
the call is connected
to the Voice Mail
Service Center.
Continued