User's Guide Part 1

61
Voice/Videophone Calls
5
Enter a name in the name field and
an international access number in the
international access number field.
Enter a name within 10 full-width characters or 20
half-width characters and an international access
number within 10 digits.
6
Press (Complete) and press .
The international access number is saved.
To set the Auto assist number
Move the cursor to the input field and press
(Auto). “ ” appears to the left of the Auto assist
number.
7
Select [Country code] and press .
The Set country code display appears.
8
Select an input field and press .
Ｃｏｕｎｔｒｙ ｃｏｄｅ２３
Ｃｏｕｎｔｒｙ Ｎａｍｅ
Ｃｏｕｎｔｒｙ ｃｏｄｅ
9
Enter a country name in the country
name field and a country code in the
country code field.
Enter a country name within seven full-width
characters or 14 half-width characters and a
country code within five digits.

“+” is already entered in the country code field.
10
Press (Complete).
The country code is saved.
To set the Auto assist number
Move the cursor to the input field and press
(Auto). “ ” appears to the left of the Auto assist
number.
Placing a Call by Specifying
a Sub-address
<Sub-address>
You can set to place a call to a specific phone
or communication device by specifying a sub-
address.

The sub-address is also used when you select a
content in V-Live.
1
From the Menu, select [Settings]
→
[Call]
→
[Call assist]
→
[Sub-address] and
press
.
[ON]:
Recognize the numbers after “ ” as a sub-
address.
[OFF]:
Do not recognize the numbers after “
” as a sub-
address.
2
Select [ON]/[OFF] and press .
The Sub-address is set.
To place a call by specifying a sub-address
In the stand-by display, enter a phone number +
+ sub-address and press either or
(V.phone).
●
Even if the Sub-address is set to ON, “ ” is not
recognized as the sub-address separator but as
part of a phone number in the following cases:
where it is at the beginning of a phone number
and immediately after a number entered using
Prefix/Int’l prefix/Country code of the Option call
display for placing a call.