User's Guide Part 1

53
Voice/Videophone Calls
Entering a “+”
If you enter “+” at the beginning of a phone
number when the Auto conversion of the Int’l
dial assist setting is set to [ON], a call is dialed
by automatically adding the set international
access number (set to “009130010” at the time
of purchase).
1
Press for over a second in the
stand-by display.
“+” is entered.
●
You may not be able to place the call if you enter
other than a phone number after “+” or enter only
“+”.
Switching to/from Voice/Videophone
Call
<Chg. to videophone/Chg. to voice call>
A caller can switch to/from voice/videophone
call during a call.

This function can be used only between terminals
that can switch between voice and videophone
calls. A recipient must preset the V.ph switch notice
to [Indication ON] (P.78).
Example: Switching from voice call to videophone call
1
Press (Func) during a voice call, select
[Chg. to videophone], and press
.
Ｃｈａｎｇｅ ｔｏ
ｖｉｄｅｏｐｈｏｎｅ？
Ｙｅｓ
Ｎｏ
[Yes]:
Switch the call from voice call to videophone call.
[No]:
Return to the voice call without switching the call.
To switch from videophone call to voice call
From the Function menu, select [Chg. to voice
call]
→
[Yes]. When the call is switched to the
voice call, the hands-free operation is canceled.
2
Select [Yes] and press .
Ｃｈｇ．ｔｏ ｖｉｄｅｏｐｈｏｎｅ
The recipient’s image
A substitute image may appear
according to the setting on the
recipient’s terminal.
While the call is switched, an animation is displayed
and you hear a guidance notifying you that a call is
switched.
When the call is switched to the videophone call,
your image is sent to the recipient and the call is
switched to the hands-free operation that allows
you to hear the recipient’s voice from the speaker.
Continued