User's Guide Part 1

52
Voice/Videophone Calls
●
If you use the FOMA terminal to place a
videophone call to emergency numbers (110,
119, and 118), it automatically switches to voice
call dialing.
●
When you place a videophone call to a terminal
that is not equipped with a videophone function,
or when a recipient is outside of the service area
or the phone is powered off (even if the FOMA
terminal has the videophone function), your call
is not connected. When you place a videophone
call to a terminal that is not equipped with a
videophone function and the Auto redial(voice) is
set to [ON], the recipient’s terminal disconnects
your videophone call before it is connected, and
the FOMA terminal redials the call as a voice call.
If, however, you dial a wrong number such as
an ISDN synchronous 64kbps or PIAFS access
points, or ISDN videophone that is not 3G-324M
(as of December 2007) compatible, the above
operations may not take place. Note also that
you may be charged for the call.
Using the Hands-free Function
When you switch to the hands-free operation
during a call, you can hear the caller’s voice
from the speaker and talk hands-free.
Example: Switching to the hands-free operation during
a voice call
1
Press ( ) during a call.
Ｔａｌｋｉｎｇ
Ｃａｌｌ ｄｕｒａｔｉｏｎ ０：０３
The call is switched to the hands-free operation and
“ ” appears.
To cancel the hands-free function
Press ( ) again.

When you finish the call, the hands-free operation
is automatically canceled.
●
Talk into the FOMA terminal from a distance of
30 cm or less.
Entering a Pause, Timer, or +
You can include a pause, timer, or + in a phone
number (within 80 digits in all) to place a call.
The phone number and pause, timer, or + can
be saved together in the Phonebook.

Pause and timer are valid only for a voice call.
Entering a pause “P”
If you enter “P (pause)” between the phone
number and touch-tones when you book a
ticket or play back your home answering
machine, the touch-tones are sent by
separating the numbers at the pause (P).
1
Press in the phone number input
display.
“P” is entered.
To send touch-tones saved in the Phonebook
When the touch-tones are displayed after you
place a call from the Phonebook, press (Call).
●
Some receiver devices may not be able to
accept touch-tones.
Entering a timer “T”
To dial an inside line number following an
outside line number, enter “T (timer)” between
the outside and inside line numbers. After
a preset interval in seconds, the inside line
number is dialed following the outside line
number. An interval of about one second is
added for every timer (T) entry. You can enter
“T” consecutively to make the interval longer.
1
Press for over a second in the phone
number input display.
“T” is entered.