User's Guide Part 1

50
Voice/Videophone Calls
What is Videophone?
You can use the videophone function between
DoCoMo videophone compatible terminals.
You can use videophone to talk to the recipient/
caller while looking at each other’s image. You
can send a still image, substitute image, or
Chara-den character instead of your own.
DoCoMo’s videophone complies with
“3G-324M
※
1
standardized by 3GPP
※
2
for
global standard”. The FOMA terminal cannot
be connected to a videophone that uses a
different system.
※
1 3G-324M

Global standard for third-generation mobile
videophones.
※
2 3GPP (3rd Generation Partnership Project)

Local standardization committee set up for
development of common technology specifications
related to third-generation mobile wireless
communication systems (IMT-2000).
Using the Display during a
Videophone Call



 




: During videophone call

Videophone image (Large)

Display an image of a person you are talking to
(default setting).

Videophone image (Small)

Display your image (default setting).

Call duration

Display the call duration in the hh:mm:ss format.

Outgoing image status

: Camera image is being sent.

: A still image is being sent.

: A Chara-den character is being sent.

Zoom magnification

Display the zoom magnification bar.

: Hands-free ON

: Photo light ON

Mode

: Mode for operating full-body actions

: Mode for operating parts actions

: Mode for sending touch-tones (DTMF)
Operations during a Videophone
Call
Operation Key operation
Switch between
camera image/
substitute image
Press
(MySide/Sub). Every
time you press the key, the
display is switched between
camera image/substitute image.
Switch cameras Press (In/Out). Every time
you press the key, the camera is
switched between the In-/Out-
camera.
You can also switch between
the In-/Out-camera by opening/
closing the lens cover.
Switch ON/OFF
of the hands-free
operation
Press ( ). Every time you
press the key, the ON/OFF
setting is switched.
Zoom-in/-out image Press
(Zoom in) / (Zoom
out) when recording with the
Out-camera.
Put a call on hold F r o m the Function menu,
select [Holding]. To cancel this
function, press .
Switch the display From the Function menu, select
[Display setting].
Switch the quality of
the outgoing image
From the Function menu, select
[Visual preference]. When you
finish a call, the image quality
set for the Visual preference
of the Videophone setting is
restored.
Select a substitute
image
From the Function menu, select
[Select sub image].
Switch ON/OFF of
the photo light
From the Function menu, select
[Photo light] (when using the
Out-camera only).
Display your phone
number
From the Function menu, select
[Own number].
Switch to a voice
call
From the Function menu, select
[Chg. to voice call] (when
placing a videophone call only).
●
When you switch to the Out-camera with the lens
cover closed, the message “Please open the
lens cover” appears and your own image is sent
instead of switching to the Out-camera.