User's Guide Part 1
Before Using the Handset
39
Attaching and Removing the Battery Pack
When attaching/removing the battery pack, make sure to power off and close the
FOMA terminal.
If you attach the battery pack forcibly, the terminal on the FOMA terminal may be damaged.
Holding too hard or attaching/removing the back cover in a manner other than described below
may damage it.
■
Attaching the battery pack
1
Slide to remove the back
cover in the direction of
the arrow.
2
Hold the battery pack with the
recycle-mark side up, align the
terminal of the battery pack
with that of the FOMA terminal,
and push it into place.
Terminal
3
Align the back cover with the
grooves on the FOMA terminal
while holding it almost closed
(about 3 mm clearance) and slide
it in the direction of the arrow.
■
Removing the battery pack
1
Slide to remove the back
cover in the direction of
the arrow.
2
Raise to remove the
battery pack in the
direction of the arrow by
holding it by the tab.
Tab
Battery Pack
To make full use of the FOMA terminal, make sure to use the Battery Pack SO02.
■
Life of the battery pack
The battery pack is a consumable part. The usage duration of the battery per one charge
decreases gradually each time the battery is recharged. When the usage duration per one
charge becomes about half that of a new battery pack, the life of the battery pack is assumed
to be almost over. It is recommended that you replace the battery pack ahead of time.
Depending on the usage condition, the battery pack may be inflated as it comes to the end of
its life. This is not a malfunction.
If you continue using i-
α
ppli or talking on the videophone for a long period of time with the
battery being charged, the life of the battery pack may become shorter.
Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling
shop to protect the environment.
Li-ion