User's Guide Part 1

Before Using the Handset
32
Notification Display
An icon is displayed in the notification display to alert you, for example, when you
cannot answer a call. The icon is displayed from the left in the order of the latest event.
Move the cursor to the icon to display the text information and select the icon to
check the notification information. The icon is turned off by checking the notification
information or pressing
for over a second.
Icon Text information Description
Missed call X
※
1
There is a missed call of a voice, videophone, or PushTalk call,
or 64K data communication (P.71).
New mail X
※
2
i-mode mail/SMS is received (P.214, 235).
Mail at center Mail is held at the i-mode center (P.215).
New MessageR X Message R is received (P.230).
New MessageF X Message F is received (P.230).
New ToruCa X A ToruCa card is obtained from a reading device (P.256).
New Record msg A record message is recorded (P.72).
New V.phone msg A videophone message is recorded (P.72).
※
3
Exceed cost limit The total cost has exceeded the upper limit (P.371).
Voice Mail X
※
1
A record message is saved at the Voice Mail Service Center
(P.392).
USB cable cncted The FOMA USB Cable with Charge Function 01/02 (optional),
etc. is being connected (P.315).
PB update failed The Phonebook auto-update at the Data Security Service Center
has failed (P.105).
Stand-by SW error i-
α
ppli stand-by display security error has occurred (P.247).
Download completed Downloading the Music&Video Channel is completed (P.339).
Download failed Downloading the Music&Video Channel is failed (P.339).
Answer X Location information is requested (P.270).
Update complete The software update is completed (P.460).
※
4
Check for update There is confirmation of a software update (P.460).
Update notification The software update is necessary (P.458).
Update schedule Downloading the software is complete. Overwrite the software
with new one (P.458).
※
3
Update completed The pattern definition auto-update was completed successfully
(P.464).
※
3
Update definitions The pattern definition auto-update was failed. The update is still
required (P.464).
※
3
SW not terminated There is an active function (excluding the i-
α
ppli stand-by
display) (P.353).
※
1 When 2in1 is set to the Dual mode, the number of data is displayed separately for Number
A/Number B.
※
2 When 2in1 is set to the Dual mode, the total number of mail sent to Address A and Address B
is displayed.
※
3 Even when you press
for over a second, the icon is not turned off.
※
4 If there are more than two notifications, either “Update notification” or “Update schedule”
appears when you check “Check for update”.