User's Guide Part 1

152
Camera
Movie
[Super fine]:
Higher image quality mode. The file size is
larger and the recording time is shortest.
[Fine]:
Image quality mode for smoother movement in
movies.
[Standard]:
Standard image quality mode.
[Economy]:
Lowest image quality mode. The file size is
smaller and the recording time is longest.
3
Select the image quality and press .
The image quality is set and the icon for the current
image quality appears.
Super fine (Movie only)
Fine
Standard
Economy
Rotating the Direction of a Recorded
Image to Align to the FOMA Terminal
You can set a recorded image to be displayed
in the same orientation as that of the
FOMA terminal by obtaining the orientation
information of the FOMA terminal and adding it
to the image when it is recorded.
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Set]
→
[Auto orientation] and
press
.
3
Select [ON]/[OFF] and press .
The Auto orientation is set. When it is set to [ON],
the icon which shows the orientation of the FOMA
terminal appears.

When the image size is set to [QVGA(240
×
320)]
or [Stby(480
×
864)], the saved with this side up
indication “
” appears. The image is saved with
the indicated side up.
The FOMA terminal is held normally
The FOMA terminal is rotated to the right
by 90 degrees
The FOMA terminal is rotated by 180
degrees
The FOMA terminal is rotated to the left by
90 degrees
●
An image recorded with the Auto orientation
set to [ON] is displayed rotated accordingly
depending on which orientation the FOMA
terminal is in when the image is recorded.
Therefore, the orientation of an image may differ
between when it is displayed and when it is
saved (P.151).
Changing the Shutter Sound
The shutter sound can be selected from three
types when the Shoot mode for still images is
[Regular], [Smile shutter], [Panorama], [High
sensitivity], [BestPic™], or [Shoot with frame].

The shutter sound volume is fixed and cannot be
adjusted or muted. The shutter sound is heard even
if the Manner mode is set.

When the Shoot mode is set to [Deco-Snap], the
current shutter sound is heard when recording. You
cannot set the shutter sound.
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Set]
→
[Shutter sound] and press
.
The menu for selecting a shutter sound appears.
3
Select a shutter sound and press .
The Shutter sound is set.
To check the shutter sound
Move the cursor to the shutter sound and press
(Play).