User's Guide Part 1

150
Camera
2
Select [Adjust]
→
[Photometry] and press
.

You can also set the Photometry by pressing
in the Camera mode display.
The menu for selecting a photometry mode
appears.
[Center]:
Photometry mode for centerweighted metering of
the display, including the periphery.
[Average]:
Photometry mode for average metering of the
whole display.
[Spot]:
Photometry mode for metering only a part in
the center of the display. Aim the object at the
Spot photometry point “
” in the center of the
display. You can use this mode effectively when
recording an object against light or an object
with the strong contrast to the background.
3
Select a photometry mode and press .
The Photometry mode is set and the icon for the
current photometry mode appears.
Center
Average
Spot
Adding a Picture Effect
T
he images can be recorded with a special effect.

When you record an image using the In-camera,
you cannot select the [Solarization].
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Adjust]
→
[Picture effect] and
press
.

You can also set the Picture effect by pressing
in the Camera mode display.
The menu for selecting a picture effect appears.
[OFF]:
Cancel the picture effect.
[Negative art]:
Set the color and brightness of the image as in a
negative.
[Solarization]:
Set the image as an illustration with sharp tones.
[Sepia]:
Set the image sepia-toned like an old
photograph.
[Black&White]:
Set the image monochrome (black and white).
3
Select a special effect and press .
The Picture effect is set.
Restoring the Default Camera
Settings
You can reset the camera settings to the
default settings. The camera settings listed
below can be reset.
Item Default setting
Select scene AUTO
Zoom magnification
×
1.0
EV ±0.0EV
White balance AUTO
Photometry Center
Picture effect OFF
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Adjust]
→
[Reset all] and press
.

You can also display the screen for confirming
whether to perform the Reset all by pressing
in the Camera mode display.
The screen for confirming whether to perform the
Reset all appears.
3
Select [Yes] and press .
The default settings are restored.
Setting the Camera
Operation
Selecting Where to Save Images
You can set the place to save recorded
images.
Example: Selecting the microSD memory card to save
the recorded still images
1
Press (Func) in the Camera mode
display, select [
], and press .