User's Guide Part 1

148
Camera
3
Select the Auto Focus type and press .
The Auto Focus is set and the icon for the current
Auto Focus type appears.

No icon appears for [Macro OFF].
OFF
Macro
S-macro
Using the Auto Timer
The Auto timer allows you to record yourself
or others without holding the FOMA terminal.
You can also set the interval until recording is
started after you press the shutter key.
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Shoot]
→
[Auto timer] and press
.

You can also set the Auto timer by pressing
in
the Camera mode display.
The menu for selecting a time for the Auto timer
appears.
3
Select a time until recording is started
after you press the shutter key and press
.
Select from [OFF], [10sec], [5sec], and [2sec].
The Auto timer is set and “ ” appears.
●
If there is an incoming call when you are
recording with the Auto timer, the recording
stops.
●
After recording, the Auto timer is automatically
reset to [OFF].
Turning on the Photo Light
The FOMA terminal’s built-in photo light can be
used when recording with the Out-camera in a
dark place, etc.
1
Press in the Camera mode display.
Every time you press , the photo light is
switched to [ON]/[OFF].
When switched to [ON], the photo light is turned on
and “ ” appears.
●
The photo light is for helping you record in a dark
place. You cannot expect as much amount of
light from the photo light as from the electric flash
of a normal camera.
Emitting the Flash
You can use the flash when recording with the
Out-camera in a dark place.

When the Shoot mode is set to [BestPic™] or
[Continuous mode], if you use the flash when
recording images, the light intensity of the flash
drops to the photo light level.

When the Shoot mode is set to [Panorama], the
Flash is set to [OFF] temporarily.
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Shoot]
→
[Flash] and press .

You can also set the Flash by pressing
in the
Camera mode display.
[AUTO]:
The flash is emitted depending on the brightness
of surroundings.
[Forced ON]:
The flash is always emitted.
[OFF]:
The flash is not emitted.
3
Select a flash type and press .
The Flash is set and the icon for the current Flash
setting appears.

No icon appears for [AUTO].
Forced ON
OFF
Using the Grid Line
The Grid Line which divides the display into 3
×
3 panes helps you, as auxiliary lines, position
objects on the display. Using the Grid Line, you
can record an image in which all objects are
arranged well-balanced.

When the Shoot mode is set to [Deco-Snap], the
Grip Line does not appear.

When the Shoot mode of movie is set to [Sound
only], the Grid Line does not appear.
1
Press (Func) in the Camera mode
display, select [
], and press .
2
Select [Shoot]
→
[Grid Line] and press
.

You can also set the Grid Line by pressing
in the Camera mode display.
3
Select [ON]/[OFF] and press .
When you select [ON], the Grid Line appears.