User's Guide Part 1

146
Camera
●
When there is not enough memory or the number
of recorded time of saved movies exceeds
the maximum number, the message appears.
Change the place to save the movie or delete
unnecessary movies. Even if recording is
possible, the maximum recording time may not
be achieved.
●
When you switch to movie recording from still
image recording, the following items are reset.
Item Default setting
Switch camera Out camera
Select scene AUTO
Zoom magnification
×
1.0
EV ±0.0EV
Shoot mode Regular
Auto Focus Macro OFF
Auto timer OFF
Photo light OFF
Grid Line OFF
White balance AUTO
Photometry Center
Picture effect OFF
●
Noise in the form of a mosaic may appear in an
image or the image or sound may be interrupted
while you are recording a movie. Note that this is
not malfunction.
●
The movie sound is recorded via the microphone
of the FOMA terminal. If you operate the keys
or block the microphone during recording, the
recording may be affected by the sound of the
keys and other noise.
●
The motion of the recorded movie may be rough
depending on the object you are shooting and
the recording conditions.
Changing the Camera
Settings
Setting Whether to Add Location
Information to an Image When Saving
You can add location information automatically
to a recorded still image using the GPS
function.

When an image recorded with the Auto attach
loc. info of the Set attach loc. info set to [ON] is
posted on a blog, sent with mail, etc., the location
information is at risk of being known by other
persons.
1
Press (Func) in the Camera mode
display, select [
], and press .
Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
Ａｕｔｏ Ｆｏｃｕｓ
Ｍｕｌｔｉ ｆｏｃｕｓ
Ａｕｔｏ ｔｉｍｅｒ
Ｐｈｏｔｏ ｌｉｇｈｔ
Ｆｌａｓｈ
Ｇｒｉｄ Ｌｉｎｅ
ＯＦＦ
Ｍａｃｒｏ ＯＦＦ
Ｍｕｌｔｉ ＡＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ
Ｓｈｏｏｔ Ａｄｊｕｓｔ Ｓｅｔ
2
Select [Shoot]
→
[Set attach loc. info] and
press
.
Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
Ａｕｔｏ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
ＯＦＦ
Ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ｍｅｔｈ．
Ｆｒｏｍ ａｃｔ． ｃａｍｅｒａ
Ｌｏｃａｔｉｏｎ ｉｎｆｏ
[Auto attach loc. info]:
Select whether to add location information
automatically when saving an image.
[Attach loc. info meth.]:
Select an obtaining method of location
information to be added automatically.
[Location info]:
Save location information to be added to an
image.
3
Select [ON]/[OFF] of whether to add
location information automatically at
[Auto attach loc. info].