User's Guide Part 1

145
Camera
3
Select a frame and press .
The Shoot mode is set to [Shoot with frame] and
“ ” and the selected frame appear.
To check a frame
Move the cursor to a frame and press (Play).
4
Point the camera at the object and press
halfway.
The white focus frame/frames are used to adjust
the focus. When the image comes into focus, the
confirmation sound is heard, and the focus frame/
frames turn green.
5
Press .
An image is recorded with the shutter sound and
the screen for confirming whether to save the image
appears.
6
Press (Save).
The image is saved.
Recording Movies
<Movie shoot>
You can record a movie with the camera.

The movie recording time varies depending on
where to save a movie (P.152, 153).
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (Movie shoot), and press .

You can also switch to the Movie shoot display
by pressing
in the Camera mode display.
Every time you press , the display switches
between the Shoot by photo display and Movie
shoot display.
The display switches to the Movie shoot display
and “
” appears.
2
Point the camera at the object and press
.
The recording start tone is heard and the movie is
recorded. “ ” changes to “ ”.

While you record a movie, the estimated
recordable time is displayed by both a bar and
numbers under the image and the Auto timer
indicator flashes.
To pause recording
Press (Pause). The recording pause tone
sounds and “ ” appears. To restart the
recording, press (Record).
To record movies using (Shoot)
Press (Shoot). To end the recording, press
(Stop).
3
Press to end recording.
The recording end tone is heard, the recording is
stopped, and the screen for confirming whether to
save the movie appears.
4
Press (Save).
The movie is saved.
To cancel movie recording
Press and select [Yes].
To check before saving
Press (Play).
To attach to mail
Press (Func) for over a second. The movie
is saved and the Edit mail display appears. You
can also attach a movie to mail by selecting [ ]
from the Function menu.
To post on a blog
From the Function menu, select [ ] (P.358).
Continued